Cart 2 india

Specification
Brand : Bloepum
BulletPoint1 : Over current protection: 50/55/60 A; Over current protection delay: 20/25/30mS; Single section since the power consumption: 30uA; Single section between the power consumption: 3uA
BulletPoint2 : Single section over charge detection voltage: 4.18- /4.22V; Over charge recovery voltage 4.05- 4.15 V; Over charge detection delay: 0.5/1.0/2.0S; Single section over discharge detection voltage: 2.75-2.85 V; Over discharge recovery voltage: 2.90-3.20 V; Over discharge detection delay: 0.5-2.0S
BulletPoint3 : Name: protection board
BulletPoint4 : Charging voltage: 21 V; Charge MOS pressure value: 35 V; Discharge MOS pressure value: 35 V; Charging current: 56 A; Continuous discharge current: 20 A
BulletPoint5 : Short / over / over current protection recovery short circuit / over discharge / over current protection after removal of load auto recovery
Color : green
ExternallyAssignedProductIdentifier : 6134202479860
ItemName : Bloepum 6X 5S 18V 21V 20A Li-Ion Lithium Battery 18650 Battery Screwdriver Shura Charger Protection Board Fit Turmera
ItemPackageDimensions_Height : 12 centimeters
ItemPackageDimensions_Length : 6 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-eyewear
Manufacturer : Bloepum
ModelName : 750154677
ModelNumber : 750154677
NumberOfItems : 6
PartNumber : 750154677
ProductDescription : Bloepum Short circuit protection delay 200/500/600uS
The normal working state of B- to P- resistance: 5m ohm
Continuous 20A current maximum temperature rise: 25℃
Working environment (humidity) relative humidity: greater or equal to 98% (long-term stability under the humidity)
Working environment (temperature) -30 ~ 80℃(in the lower temperature range of long-term stability)
colour: green
Material: plastic

Package Contents:
6 x Battery protection board(Factory slightly different)

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
ProductSiteLaunchDate : 2025-03-10T01:35:05.183Z
UnspscCode : 26111700