Cart 2 india

Specification
Brand : QitinDasen
BulletPoint1 : Size: 22.1*12.5cm / 8.7*4.92 Inches
BulletPoint2 : Application: Screen protective film compatible with Anycubic Photon M3 Premium 8K, Elegoo Saturn 2, Phrozen Mighty 8K 10.1" LCD 3D printers
BulletPoint3 : High Transmittance: It is made of 10.1 screensaver film PET material, and the light transmittance is more than 95%. It ensures that the ultraviolet ray penetrates the protective film for resin curing, can protect the LCD screen while maintaining the printing accuracy of the 3D printer, and ensure that the quality of the printing model is not affected.
BulletPoint4 : High Quality Screensaver: The screensaver is made of high quality PET materials imported from Japan. Double sided lamination ensures that it will not be scratched before use, and the edges will not produce white edges after posting. Therefore, after installation, it will not affect the printing volume and only needs to be re leveled.
BulletPoint5 : Kind Reminder: 10.1 "The edge of the protective film may be slightly smaller than the screen. If the light blocking band around the LCD screen is too large, it is necessary to remove the light blocking band and install the protective film, and then reconnect the light blocking band to avoid the screen not fitting properly.
BulletPoint6 : Efficient Protection Resin Printer: The screen protection film effectively prevents resin leakage into the 3D printer due to FEP damage in the material slot. Only one protective film is needed to greatly reduce the maintenance cost of the LCD screen and extend the lifespan of the 3D printer screen.
Color : Tranparent
CompatibleDevices : 3d打印机
CompatiblePhoneModels : 3D Printer
ExternallyAssignedProductIdentifier1 : 717522728571
ExternallyAssignedProductIdentifier2 : 0717522728571
FinishType : Glossy
IncludedComponents : screen protector film
ItemDisplayWeight : 0.1 kilograms
ItemHardness : 3H
ItemName : 10.1 "LCD Screen Protective Film Compatible with ELEGOO Saturn 2, Phrozen Sonic Mighty 8K, Photon M3 Premium Resin 3D Printer
ItemPackageDimensions_Height : 24.3 centimeters
ItemPackageDimensions_Length : 0.5 centimeters
ItemPackageDimensions_Width : 15.9 centimeters
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : Soonyeadre
Material : Polyethylene Terephthalate
ModelNumber : SDY 010 prote film
NumberOfItems : 1
NumberOfTeeth : 20
PartNumber : SDY 010 prote film
ProductDescription : 5PCS resin 3D printer screensaver film, suitable for 10.1 inch LCD resin 3D printer.

Size: 221mm * 125mmx0.33mm
Perfect for 10.1-inch monochrome screens, compatible with Anycubic Photon M3 Premium 8K, Elego Saturn 2, Phrozen Mighty 8K, and other resin 3D printers with 10.1-inch screens.

Installation steps:
1. Tear off the stained screensaver and wipe the screen with an alcohol sponge
2. Wipe the screen with a dry cloth to remove small dust.
3. Strip the back of the screensaver. Align the protector with the edge of the screen and use a plastic scraper to stick it from one end to the other.
4. Use a hard card or plastic scraper to gently push each bubble onto the edge of the screen to remove any remaining bubbles. Smooth out the protective cover, then peel off the front cover, and finally complete.
After installation, please use cleaning solution and non-woven cloth to wipe the tempered film clean.

Tip: The thickness of the tempered film is 0.33mm. To avoid printing issues, it is recommended to re level the 3D printer after installing the tempered film.

Function of resin printer LCD screensaver film:
1. The transmittance of the tempered film is 95%, which will not affect the light of the monochrome screen to pass through the resin in the tempered film curing resin tank.
2. The tempered film has a good protective effect, which not only protects the monochrome screen from being scratched by sharp objects in daily use, but also prevents resin leakage and screen pollution caused by damage to the demolding film.
ProductSiteLaunchDate : 2023-02-22T10:38:17.657Z
ScreenSurfaceDescription : Glossy
Size : 10.1 inch
Style : 10.1"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
WarrantyDescription : no