Cart 2 india

Specification
Brand : 3D SOURCERER
BulletPoint1 : COMPATIBLE WITH PRUSA MK4, PRUSA MINI & PRUSA MK3 - Create a stable environment for your Prusa MK4, Prusa Mini, or Prusa MK3 with the DELACK Enclosure. WIth a wide variety of filament routing options, the DELACK Enclosure is compatible with a wide variety of 3D printing setups and is adaptable to your specific workspace.
BulletPoint10 : 4 INCH DUCT FOR VENTING FUMES - If you prefer to externally ventilate your 3D printer, the DELACK 3D Printer Enclosure has an adapter for the 120mm fan setup so that you can vent the fumes from your 3D printer enclosure using a 4 inch duct.
BulletPoint2 : UPGRADE YOUR LACK ENCLOSURE - If you are looking to upgrade your LACK Enclosure, this is the perfect enclosure for you. Made to fit perfectly on Compatible with an IKEA LACK table, the DELACK Enclosure is a step up in quality as well as functionality.
BulletPoint3 : LED LIGHT INCLUDED - Included in the DELACK Enclosure is an LED light with a 5V power brick so that you can add an LED light to your 3D printer enclosure for easily viewing your 3D prints at night. We've managed to make the prints for the LED light compatbile with the smaller print bed of the Prusa Mini so that everyone can add the LED to their setup!
BulletPoint4 : 550MM x 486MM x 450MM (21.7" x 19.1" x 17.7") SIZE - With a length perfectly matching the IKEA LACK table, this enclsosure will fit flush with the front and back of an IKEA LACK table. If you perfer to place your 3D printer enclosure on your desk or countertop, the DELACK is narrower than an IKEA LACK table, saving space while still providing the perfect amoutn of space for the Prusa MK4, Prusa Mini, or Prusa MK3 to function properly.
BulletPoint5 : LED LIGHT INCLUDED - Included in the DELACK Enclosure is an LED light with a 5V power brick so that you can add an LED light to your 3D printer enclosure for easily viewing your 3D prints at night. We've managed to make the prints for the LED light compatbile with the smaller print bed of the Prusa Mini so that everyone can add the LED to their setup!
BulletPoint6 : VENTILATE YOUR SPACE WITH 120MM FANS & HEPA FILTERS - The DELACK Enclosure is compatible with 120mm fans for ventilation as well as multple accessories for ventilation including a HEPA filter and an air duct adapter. If you prefer to print without a fan, a part can be printed to cover the cutout at the back of the 3D printer enclosure.
BulletPoint7 : WYZE CAM V3 FOR REMOTE MONITORING - Monitoring your Prusa 3D printers can be a challenge since a camera is not built in to the 3D printer. With the DELACK 3D Printer Enclosure, we have added a simple corner adapter so that you can add a WYZE CAM V3 to your enclosure for monitoring your printer remotely.
BulletPoint8 : REMOVABLE CORNER GUARDS FOR ADDED SAFETY - The plexiglass corners of 3D printer enclosure can be sharp - to prevent unwanted harm, removable corner guards are available to cover the corners of the enclsoure for added safety.
BulletPoint9 : FULLY COMPATIBLE WITH THE MMU3 - If you are looking to use the MMU3 with your 3D printer enclosure, the DELACK has an adapter for the MMU3 that postions the buffer directly next to the enclosure as recommended by the manufacturer. With a fully removeable top, the MMU3 is easy to access for troubleshooting and mainteance with removing the 3D printer from inside of the DELACK Enclosure.
Color : Blue
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
ConnectivityTechnology : USB
CoolerHeatsinkCompatibility : 3D Printer Stepper Motor Drivers (LV8729, A4988, DRV8825, TMC2208, TMC2100, TMC2130)
CustomerPackageType : Traditional packaging
ExternallyAssignedProductIdentifier : 00850012878483
ExternallyAssignedProductIdentifier1 : 0850064863659
ExternallyAssignedProductIdentifier2 : 850064863659
FileFormat : STEP
IncludedComponents : wheel
IncludedComponents1 : x6 3mm plexiglass panels
IncludedComponents2 : x1 LED Light with 5V Power Brick
IncludedComponents3 : x1 16GB USB A & C Thumb Drive
IncludedComponents4 : x4 608 bearings
IncludedComponents5 : DELACK Fastener Set - x100 M5x12mm bolts, x100 M5 nuts, x20 rubber plugs, x20 magnets, x4 dowel rods
ItemName : 3D SOURCERER DELACK 3D Printer Enclosure Kit with LED Light | Made for Prusa MK4 & Prusa Mini | Compatible with IKEA Lack Table | Plexiglass Cover | Constant Temperature | Printed Parts Not Included
ItemPackageDimensions_Height : 81.6102 centimeters
ItemPackageDimensions_Length : 8.4074 centimeters
ItemPackageDimensions_Width : 56.2102 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : Willis Worxs, LLC
Material : Acrylic
ModelNumber : Solid V wheels
MountingType : Panel Mount
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : DELACK_V1
ProductDescription : The DELACK Enclosure by 3D Sourcerer is designed specifically for the Prusa MK4, Prusa Mini, and Prusa MK3 series of 3D printers. This 3D printer enclosure kit contains all of the parts needed to fully assemble the enclosure EXCEPT the 3D printed parts, which are available for download. Featuring a modular design, this 3D printer enclosure for the Prusa MK4, Prusa Mini, and Prusa MK3 is designed to be customizable for your specific needs. Whether you want to add a custom name to your 3D printer enclosure, setup a camera for remote print monitoring, or add a ventilation system to your 3D printer setup, we have created accessory prints to best suite your 3D printing needs! We've also included extras such as an LED light, a USB C/A thumb drive, and a set of bearings for a fillament roller to complete your 3D printing setup!
ProductSiteLaunchDate : 2023-11-07T08:00:00.000Z
Size : 254*245mm
Style : Aluminum 24V
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 44101700
Voltage : 24 volts