Cart 2 india

Specification
Brand : 3Dman
BulletPoint1 : The 3D Touch auto leveling sensor is a device that uses the Hall defect to achieve leveling .The position of the point can be obtained by touching the point on the heated bed ,and then compensated by adjusting the Z-AXIS height during printing ,Printing can also be achieved even though the platform is not flat .
BulletPoint10 : 【Important Reminder】: In the fourth installation step of the manual, if you find that the size of the left acrylic marked with L is incorrect, please use the acrylic sheet marked with B to install it on the left side of the frame and install the acrylic sheet marked with L on the back.
BulletPoint2 : Features simple, smart and precise. It could work with nearly any kind of bed materials, such as glasses, woods, metals and so on. The position of the point can be obtained by touching the point on the heated bed, and then compensated by adjusting the z-axis height during printing.
BulletPoint3 : The main functions and controls of 3D touch are the same as most auto bed leveling sensors, which consists of a RC servo and a micro switch,thus,3D printer touch can be used on almost every 3D printer control board.
BulletPoint4 : NOTE: Pulling/pushing hardly on the push-pin may damage Touch sensor and make it less accurate. Any problem when you receive the order, CONTACT US FIRST please!
BulletPoint5 : By using progressively designed solenoid and hall sensor, it can integrate high precision in such a simple structure.To make it more user-friendly and to bring you more enjoyable printing experience.
BulletPoint6 : Safety Measures: The enclosure effectively prevents dust particles from compromising print quality and protects against accidental contact from children or pets.
BulletPoint7 : Long-lasting Durability: The sturdy construction ensures stability during operation, reducing vibrations and maintaining print precision for long-term use without compromising quality.
BulletPoint8 : Designed for Bambu Lab A1 Combo: Specifically designed with AMS lite cable inlet and four-way pneumatic interface for Bambu Lab A1 users. The enclosure size is 540x600x540MM (21.26x23.62x21.26''). Please verify the dimensions carefully when purchasing for other printer models.
BulletPoint9 : Upgradable: We provide optional accessories for putting AMS lite on the top. If you need this, please search B0DJ6RLSQ2 to purchase AMS lite extension cable and longer PTFE tubes kit.
Color : 3D Touch
CompatibleDevices : 3D Printer
CompatibleMaterial1 : Resin
CompatibleMaterial2 : 3D Resin Printer
ConnectorGender : Male-to-Male
ConnectorType : 4 Pin Dupont, 6 Pin Ph 2.0
CustomerPackageType : coiled in protective tubing or sealed anti-static bag
ExternallyAssignedProductIdentifier1 : 791738580352
ExternallyAssignedProductIdentifier2 : 0791738580352
GpsrSafetyAttestation : 1
IncludedComponents : Profiles, acrylic sheets, screws, wrenches, LED light, etc.
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : 3DMAN 3D Touch Auto Bed Leveling Sensor for Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series and Other 3D Printers
ItemPackageDimensions_Height : 19.5 centimeters
ItemPackageDimensions_Length : 1.5 centimeters
ItemPackageDimensions_Width : 13.8 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : 3DMAN
Material : metal， Plastic
Material1 : Acrylic
Material2 : Aluminum
ModelName : Iverntech Stepper Motor Cables
ModelNumber : NEMA14 Stepper motor
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPins : 4
OperatingTemperature : 160 degrees_celsius
PackageLevel : unit
PartNumber : 3Dtouch-2.0
ProductDescription : Specifications:
Current:15mA
Max current (peak): 300mA
Voltage: 5V
Shell material: PC
Shell color: White translucent
Cable length : Short: 200mm Long: 1000mm
Wire:
3pin: Green :-GND RED:+5V Orange: Signal cable
2pin: Black:-GND White :Z min

Work with LCD12864 and MKS Robin SGen_L Gen_L:
https://youtu.be/r2A0b7XQEaI
Work with MKS TFT35 and Robin SGen_L Gen_L:
https://www.youtube.com/watch?v=CB1x841_WYo
Replacement needle:
https://www.aliexpress.com/item/4000842314046.html
Used on CR-10 / Ender-3 3D printer:
https://www.aliexpress.com/item/4001211961989.html

Instructions
1.After receiving the module, do not install the module to the printer. First connect the signal wires of the module to the motherboard one by one.
After power on, there will be a needle suction and push needle action, which is normal.
2.When the main board and the module are powered on, do not plug and unplug the cables casually.
Please be sure to connect when the power is off.
3.After the firmware setting is completed, it is still uncertain whether the setting is correct. You can manually trigger the module in advance
to check whether the machine is operating normally. If it is abnormal, please stop it in time and recheck the firmware settings.
Prevent the probe from hitting the platform, causing damage to the module.
4.Due to there are too many motherboard manufacturers and models, advise customers to consult the motherboard manufacturer for specific settings.
To prevent incorrect settings due to different motherboards.

Package Included:
3D Touch Auto Leveling Sensor × 1
ProductSiteLaunchDate : 2021-01-09T08:53:50.621Z
RecommendedUsesForProduct : 3D Printer Stepper Motors
Size : 1.5M
SpecificationMet1 : RoHS
SpecificationMet2 : UL
Style : For A1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 6
UnspscCode : 26111700
Voltage : 5 volts
Voltage1 : 24 volts
Voltage2 : 12 volts