Cart 2 india

Specification
Brand : 3DTOOLS
BulletPoint1 : Bamb LAB Original,This Liquid Adhesive is a adhesive specifically developed for 3D printing, suitable for printing materials such as PLA, ABS, and PETG on low-temperature, high-temperature, and frosted boards. it can help to print at high speed and maintain a constant adhesive force without worrying about issues such as model detachment or edge warping.
BulletPoint2 : Strong Adhesive: Greatly reduces the probability of model printing failure, avoids duplicate printing, and makes it easy to remove the model from the construction board after printing
BulletPoint3 : Easy Release and Clean : It is extremely easy to clean the glue at the bottom of the construction board or model; Compared with solid glue sticks, this glue is easier to use
BulletPoint4 : The ingredients are environmentally friendly and harmless to the human body
BulletPoint5 : Package include :A hot end set 0.4mm
Color : Green
CompatibleMaterial : Pla, Abs, Petg
ExternallyAssignedProductIdentifier1 : 0761241888818
ExternallyAssignedProductIdentifier2 : 761241888818
IncludedComponents : Glue
ItemForm : Liquid
ItemName : 3DTOOLS Bamboo lab Original 3D Printer Adhesive Glue Aviod Warping for ABS, PLA, PETG, HIPS and TPU Filament Bambu Lab P1,X1,A1,A1MIMI 3D Printer 60ML
ItemPackageDimensions_Height : 26.0096 centimeters
ItemPackageDimensions_Length : 7.3914 centimeters
ItemPackageDimensions_Width : 8.001 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-accessories
ItemVolume : 60 milliliters
Manufacturer : Bambulab
Material : Synthetic Rubber-based Formulation
ModelNumber : P1
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 3DT-BAMBU-GLUE
ProductDescription : Instructions: Apply pressure to the applicator to open the internal valve, and then apply evenly to the printing area. After printing, simply clean the bottom of the building board and model with water. (Detailed operation instructions can be viewed by scanning the QR code on the bottle.) Precautions: 1. Suitable for consumables such as PA, PETG, PET, ABS, ASA, TP, etc. 2. To ensure optimal results, it is not recommended to reuse it. 3. Do not press the bottle too hard. 4. If the adhesion force to certain materials is not enough, please adjust the high hot bed temperature appropriately.
ProductSiteLaunchDate : 2024-08-28T15:14:04.944Z
Size : 0.4mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 2.03
UnspscCode : 31201600
Viscosity : Low
WaterResistanceLevel : water_resistant