Cart 2 india

Specification
AssemblyInstructions : Included (Painting Process Guide)
Brand : Skouphy
BulletPoint1 : Super quiet: Silent function( Customized and Non-standard matching).
BulletPoint2 : Driver: TMC2225 driver. Marlin 2.0.1 and bootloader installed. You can copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
BulletPoint3 : Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
BulletPoint4 : Easy to Operate: With USB Port,can be Worked With E/Z/Y/X Axis Motor.
BulletPoint5 : 【Warm Note】: We kindly suggest you please check whether each part is tightened before use, because the assembled P1P/P1S hotend kit will be loosened during transportation. Then after installing this hotend print head kit, we suggest you to re-level the heat bed.
BulletPoint6 : BIGTREETECH Eddy Duo V1.0 equipped with a dip switch on the back, supporting USB or CAN dual communication methods. Add 200mm ZH1.5 to 4Pin DuPont head wiring for easy connection to the CAN interface of the EBB SB2209 CAN fan board. Add bottom center point silk screen printing for DIY parameter adjustment convenience
Color : Hotend for P1P P1S
CompatibleDevices : Printer
CompatibleMaterial : Resin
CompatibleMaterial1 : Acrylonitrile Butadiene Styrene
CompatibleMaterial2 : Acrylonitrile Styrene Acrylate
CompatibleMaterial3 : Polycarbonate
ExternallyAssignedProductIdentifier : 6937120308454
ExternallyAssignedProductIdentifier1 : 0789430974852
ExternallyAssignedProductIdentifier2 : 789430974852
IncludedComponents : 3D Printer Hotend for Bambu Lab P1P/P1S
ItemName : Creality Ender 3V2 New Upgraded Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3V2 3D Printer
ItemPackageDimensions_Height : 15.0114 centimeters
ItemPackageDimensions_Length : 4.5974 centimeters
ItemPackageDimensions_Width : 11.811 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : Skophy
Material : Acrylic
MemorySlotsAvailable : 2
MfgSeriesNumber : EL-3D-TH1
ModelName : EL-3D-TH1
ModelNumber : Creality Ender 3V2 Mainboard
NumberOfBoxes : 1
NumberOfItems : 1
OperatingSystem : Linux
PartNumber : Creality Ender 3V2 Mainboard
ProductDescription : HysiPrui P1P/P1S Hotend Assembled Extruder Printhead Kit for Bambu Lab P1P/P1S- 3D Printer Hot End Replacement with 0.4mm Nozzle, Thermistor, Heater Cartridge, Heatsink, Heatbreak and Heat Block

Fits for 3d printers:
Bambu Lab P1P
Bambu Lab P1S

Hotend Kit Includes:
Nozzle (1.75mm x 0.4mm)
Heater Cartridge
Throat Tube Heatbreak
Heater Block
Thermistor
Heat Sink Block
Silicone Sock Cover

Notice: It's semi-assembled, please complete it by yourself.
Small parts, keep away from children.
ProductSiteLaunchDate : 2020-10-12T06:44:44.494Z
SeriesNumber : 1
Size : Large Size
SpecificUsesForProduct : Painting 3D Printed Models and Miniatures
StrapType : Drawstring
Style : Resin Curing Bag
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SystemBusStandardSupported : SATA 1
UnspscCode : 43201513
Voltage : 3 volts
WaterResistanceLevel : waterproof