Cart 2 india

Specification
Brand : Bondtech
BulletPoint1 : Power: 24V 60W. 300°C long time printing: NTC100K B3950 thermistor is used by most of the 3D printers, we use imported chip so that this thermistor can sensor the temperature under 320°C degree, but for long printing, please keep the temperature under 300°C degree.
BulletPoint2 : The thermistor is directly installed in the BLOCK to obtain a more realistic temperature reading when the material comes out of the hot end
BulletPoint3 : Bimetal Heatbreak: Inner wall roughness Ra0.4, made from two components, Copper alloy and Titanium Alloy TC4. Titanium TC4 reduces heat upward conduction at the heating position, and copper for heat dissipation to accelerate heat conduction.
BulletPoint4 : Ceramic heating ring with built-in copper plated heating loop. The ceramic can be heated evenly, fast heating, can reach 360°C degree loop heating. But due to the thermistor temperature limited, please keep the printing temperrature under 300°C degree for long time.
BulletPoint5 : Package: 1xaluminum heatsink with buckles, 1x heatbreak. 1x Heater block installed with heater and thermistor, 1x brass nozzle 0.4, 1xsilicone cover(can reach 300C degree) and 2x cables
Color : Multicolor
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
CompatibleDevices3 : Personal Computer
CompatibleMaterial : Polycarbonate
ExternallyAssignedProductIdentifier : 7350011413058
ExternallyAssignedProductIdentifier1 : 791548327314
ExternallyAssignedProductIdentifier2 : 0791548327314
ExternallyAssignedProductIdentifier3 : 00779008287101
GpsrSafetyAttestation : 1
ItemName : Genuine Bondtech Adapter Direct – Bowden 1.75 (11007)
ItemPackageDimensions_Height : 8.382 centimeters
ItemPackageDimensions_Length : 2.54 centimeters
ItemPackageDimensions_Width : 2.54 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : Bondtech
Material : Aluminum, Copper, brass, titanium
Material1 : Silicone
Material2 : Polyimide
ModelNumber : 11007
NumberOfBoxes : 1
NumberOfItems : 1
OperatingSystem : Linux
PackageLevel : unit
PartNumber : 11007
ProductDescription : With this adapter you can use the Extruder with a Push-fit for the bowden tube in the groove mount where the Hot-end is located. CNC machined in aluminium and has an mounted Push-fit connector for 4 mm tube.
ProductSiteLaunchDate : 2018-06-01T17:39:37.069Z
Size : 4mm x 6mm
Style : Hotend Kit
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40150000