Cart 2 india

Specification
Brand : Gizmo Dorks
BulletPoint1 : Superior quality Kapton polyimide tape for 3D printing
BulletPoint2 : Resistant to high temperatures making it perfect for plastic filaments requiring heated build beds such as ABS
BulletPoint3 : 3D prints adhere very well especially under high heat but release cleanly when cooled
BulletPoint4 : Great durability for multiple print cycles without needing to change the tape
BulletPoint5 : Dimensions of 12 x 12 inches, can be cut to size easily
Color : Black
CompatibleMaterial : Plastic
ConnectorType : Cap
CustomerPackageType : Standard Packaging
ExteriorFinish : Stainless Steel
ExternallyAssignedProductIdentifier : 8432292307550
ExternallyAssignedProductIdentifier1 : 887503177435
ExternallyAssignedProductIdentifier2 : 0887503177435
GpsrSafetyAttestation : 1
GradeRating : Commercial
ItemForm : Flat Rod
ItemName : Gizmo Dorks Kapton Tape (Polyimide) for 3D Printers and Printing, 12 x 12 inches, 10 Sheets per Pack
ItemPackageDimensions_Height : 30.5054 centimeters
ItemPackageDimensions_Length : 0.7874 centimeters
ItemPackageDimensions_Width : 29.4894 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangle
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : Gizmo Dorks
Material : Kapton Polymide
ModelNumber : 7068
NumberOfBoxes : 1
NumberOfItems : 10
NumberOfPieces : 10
PartNumber : 7068
ProductDescription :

Kapton tape is the perfect accessory to cover your build platform during a 3D print. Kapton tape is made from a thin layer, 1 mil thick, of Polyimide film. The tape also has a 1 mil thick layer of silicone adhesive. Kapton tape is widely used because of it's ability to withstand the heating and cooling of a build platform. Certain plastics such as ABS filament adhere particularly well to Kapton tape making it perfect to use when a heated build platform is required. ABS filament will have full adhesion to the Kapton tape at the high build plate temperature required, but it will also release the printed part when the bed cools. The print will be easy to peel or pop right off making Kapton tape the practical choice for any 3D printer build plate.

• Dimensions: 12 inches wide by 12 inches wide
• 1 mil thick Kapton layer
• 1 mil thick silicone adhesive layer
• 2 mil total thickness
• Comes in a pack of 10 sheets
• Each sheet comes on a removable protective liner
• The tape can be cut down easily to fit any size shape
• Other sizes ranging from 6 to 12 inch widths are available

Dry Application
The dry method involves using a flat edge such as a ruler or a credit card to slowly peel and apply the tape while using the straight edge to keep the tape free from bubbles.

Wet Application
The wet method is similar to the dry method but involves spraying some soapy water underneath the Kapton tape. Remove the liquid by squeegee or a straight flat edge such as a ruler. This will also remove any air bubbles. The biggest benefit to the wet method is that you can re-position the tape while it is wet because the liquid allows you to easily slide the tape around. Let the Kapton tape fully dry before printing.

ProductSiteLaunchDate : 2016-11-18T02:10:48.239Z
Size : 31.4’’(800mm)
SpecificationMet : Yes
Style : For Ender 3/V2/Pro/Max
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Plastic
UnitCount : 10
UnspscCode : 31201500
WaterResistanceLevel : water_resistant