Cart 2 india

Specification
Brand : Gizmo Dorks
BulletPoint1 : Superior quality Kapton polyimide tape for 3D printing
BulletPoint2 : Resistant to high temperatures making it perfect for plastic filaments requiring heated build beds such as ABS
BulletPoint3 : 3D prints adhere very well especially under high heat but release cleanly when cooled
BulletPoint4 : Great durability for multiple print cycles without needing to change the tape
BulletPoint5 : Dimensions of 8 x 8 inches, can be cut to size easily
BulletPoint6 : 【High Compatibility】- The UV LED wavelength ranges of SUNLU UV resin curing light is 405nm. It is compatible with most standard 405nm resin, suitable for most LCD, DLP, or SLA 3D Printed objects in the market.
Color : Yellow
CompatibleDevices : Printer
CompatibleMaterial : Plastic
CoolingMethod : Blower Fan
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 887503177411
ExternallyAssignedProductIdentifier2 : 0887503177411
GpsrSafetyAttestation : 1
IncludedComponents : UV Curing Box
ItemName : Gizmo Dorks Kapton Tape (Polyimide) for 3D Printers and Printing, 8 x 8 inches, 10 Sheets per Pack
ItemPackageDimensions_Height : 20.828 centimeters
ItemPackageDimensions_Length : 0.254 centimeters
ItemPackageDimensions_Width : 16.256 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : Gizmo Dorks
Material : Kapton Polymide
MaximumRotationalSpeed : 4000 rpm
ModelNumber : B01N1GGKRC
NoiseLevel : 18 decibels
NumberOfBoxes : 1
NumberOfItems : 10
PartNumber : B01N1GGKRC
PowerConnectorType : 3
ProductDescription :

Kapton tape is the perfect accessory to cover your build platform during a 3D print. Kapton tape is made from a thin layer, 1 mil thick, of Polyimide film. The tape also has a 1 mil thick layer of silicone adhesive. Kapton tape is widely used because of it's ability to withstand the heating and cooling of a build platform. Certain plastics such as ABS filament adhere particularly well to Kapton tape making it perfect to use when a heated build platform is required. ABS filament will have full adhesion to the Kapton tape at the high build plate temperature required, but it will also release the printed part when the bed cools. The print will be easy to peel or pop right off making Kapton tape the practical choice for any 3D printer build plate.

• Dimensions: 8 inches wide by 8 inches wide
• 1 mil thick Kapton layer
• 1 mil thick silicone adhesive layer
• 2 mil total thickness
• Comes in a pack of 10 sheets
• Each sheet comes on a removable protective liner
• The tape can be cut down easily to fit any size shape
• Other sizes ranging from 6 to 12 inch widths are available

Dry Application
The dry method involves using a flat edge such as a ruler or a credit card to slowly peel and apply the tape while using the straight edge to keep the tape free from bubbles.

Wet Application
The wet method is similar to the dry method but involves spraying some soapy water underneath the Kapton tape. Remove the liquid by squeegee or a straight flat edge such as a ruler. This will also remove any air bubbles. The biggest benefit to the wet method is that you can re-position the tape while it is wet because the liquid allows you to easily slide the tape around. Let the Kapton tape fully dry before printing.

ProductSiteLaunchDate : 2016-11-18T02:10:43.900Z
RecommendedUsesForProduct : 3D Printing
Size : 4PCS 3D Printer NTC 3950 Thermistor
Style : 3-Point Heated Bed (Complete Kit)
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Plastic
UnitCount : 4.44444
UnspscCode : 31201500
UpperTemperatureRating : 111 degrees_celsius
Voltage : 24 volts
WaterResistanceLevel : water_resistant
Wattage : 18 watts