Cart 2 india

Specification
Brand : HzdaDeve
BulletPoint1 : High Thermal Conductivity: Ceramic heater improves heating efficiency contributes to more uniform heating and faster heat transfer.
BulletPoint2 : Notice: This hotend kit replacement is only compatible with Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro/Kobra 2 Plus/Kobra 2 Max FDM 3D printer.
BulletPoint3 : Package Included: 1PCS silicone cover + 1PC 0.4MM Hardened Nozzle + 1PC 0.6MM Hardened Nozzle + 1 set hotend kit (heater cartridge, thermistor, heat block,throat tube, nozzle)
BulletPoint4 : Simple Installation: Remove the old hot end and install the new hotend to start. (Heating tube, thermistor, nozzle etc are pre-installed)
BulletPoint5 : Filament material: The print head for Kobra 2 neo works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
BulletPoint6 : High Speed: It's a special stainless steel design so the print head heats evenly. The interior of the nozzle is smooth without burry, which not only reduces air resistance and prevents the filament from jamming, but supports high-speed printing.
Color : gold
CompatibleDevices : 3D Printer
IncludedComponents : kobra 2 neo hot end
ItemName : HzdaDeve Upgrade Ceramic Hotend for Kobra 2 Series Hot End Print Head Pre-Installed Extruder Kit with Extra 2PK Hardened Nozzles for Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro/Kobra 2 Plus/Kobra 2 Max
ItemPackageDimensions_Height : 11.5062 centimeters
ItemPackageDimensions_Length : 1.7018 centimeters
ItemPackageDimensions_Width : 7.1882 centimeters
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : HzdaDeve
Material : plastic
ModelNumber : ceramic print head for Kobra 2 Pro
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : ceramic print head for Kobra 2 Pro
ProductDescription : HzdaDeve Upgrade Ceramic Hotend for Kobra 2 Series Hot End Print Head Pre-Installed Extruder Kit with Extra 2PK Hardened Nozzles for Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro/Kobra 2 Plus/Kobra 2 Max

Specification:
Material: Aluminum + Stainless Steel + Brass
Nozzle：0.4mm hardened nozzle which is not easy to stick filament with high hardness, resistant to wear and tear.
Filament material: 1.75mm with PLA/ABS/PETG/TPU/Wood
Heating tube: 24V 60W
Thermistor: NTC 100k
Operating temperature range: -40~+260°C (-40~+500°F)
Simple Installation: Remove the old hotend kit and replace the new one to start. (heating tube, thermistor, nozzle, throat tube, and heating block are pre-installed)
Compatible 3D Printer: for Anycubic Kobra 2/Kobra 2 Neo/Kobra 2 Pro/Kobra 2 Plus/Kobra 2 Max

Package Include:
1 X Ceramic Hotend Kit (all accessories are pre-installed)
1 X Silicone Sock
1 X 0.4mm Hardened Nozzles
1 X 0.6mm Hardened Nozzles

The interior of the nozzle is smooth with burr-free, which not only reduces air resistance and prevents the filament from jamming on the rounded bevel, but also ensures a long service life and makes the filament smoother

After-Sale Service:
If there are any questions, just contact us freely, and a satisfactory solution will be provided within 24 hours
ProductSiteLaunchDate : 2024-09-18T01:21:31.987Z
Style : Ceramic Hotend
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 44103100
Voltage : 24 volts