Cart 2 india

Specification
Amperage : 0.2 amps
Brand : Imdinnogo
BulletPoint1 : Directly Replaceable Original: This upgrade DIY light bar kit is for Flashforg Adventuer 5M/5M Pro 3d print project, directly replace for the led when the original one is broken. Note: Regular 5M doesn't have the port for lighting control, you need to use a separate switch outside the touch-screen to control the power supply or completely power the printer down
BulletPoint2 : Voltage: 24V, Current: 0.2A, Power: about 4.8W, Low power and high brightness. Led board with two 8.5mm mounting holes for the mounting screws to fix the light bar to the front panel of the AD5M pro 3d prints or the light board on the dual side panels of the 5M by means of the magnts supplied
BulletPoint3 : 23cm/9.06in length light board contains 7pcs illuminated led chips, stabilised constant current light can create a comfortable and even healthy spatial light sense for AD5M. Connection cable length 71.5cm/28.15in for connecting led and PCB control board, supply power, plug and play
BulletPoint4 : Good modification allows better viewing of the hotend extruder print head, 0.4mm brass nozzle or 3d printings part, operation of the printer, replacement of 1.75mm filament, etc
BulletPoint5 : Install the required print parts STL files, please refer to the picture or Thingives search: 5M pro light board bracket. Lights board have terminals on both ends of the board, if you need a brighter ad5m environment, you just need to prepare two light boards and connecting wires for series connection, we are equipped with two small magnetts for installation
Color : Blue
FinishType : Unfinished
GpsrSafetyAttestation : 1
IncludedComponents : AD5M Pro Light Board
IsAssemblyRequired : 1
ItemName : Imdinnogo 3D Printer Accessories Adventuer 5M/ 5M Pro 24V LED Light Board Replacement: 7Pcs Lamp Beads with Cable Flexible Bright Cold White Lighting Strip - Increased AD5M Chamber Brightness
ItemPackageDimensions_Height : 27.1018 centimeters
ItemPackageDimensions_Length : 3.2004 centimeters
ItemPackageDimensions_Width : 5.3086 centimeters
ItemShape : Rectangular
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : Imdinnogo
Material : Copper
ModelNumber : Any-KB-Belt
MountingType : Rack Mount
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfShelves : 2
PartNumber : AIUS-AD5M Pro Light Board
PowerSourceType : Corded Electric
ProductDescription : Package Include:
1 × Led strip light
1 × light bar connecting wire
2 × magnts
Brighter than the original-light board
How do I dismantle it?
Remove the top cover of the machine
Unplug the filament inspection line and draw out the wire guide tube.
Remove the fixed rear cover
Remove the fixed front panel
Unplug the screen cable and camera cable
Remove the screws fixing the Led
Remove the screen cable from the right side panel.
Remove the right side panel Unplug the environment detection module cable
Unplug the LED light wire Extract the wire harness Remove the original LED light
Easy to install
Thread the new Led cable through the back and plug it into the corresponding connector on the motherboard.
Plug in the environmental detection module cable and lock the right side panel.
Insert the screen cable and camera cable, put the Led strip back to the front panel, lock the front panel.
Insert the filaments detection harness and wire tube into the consumables detection module (plug to the end).
Lock the top cover and snap it into place
Install the back cover
If it is ensured that the LED lights have the same interface and there are corresponding sockets on the machine, it is still applicable to other printer models

ProductSiteLaunchDate : 2024-11-12T08:20:34.870Z
RoomType1 : Home
RoomType2 : Office
RoomType3 : Workshop
RoomType4 : Studio
RoomType5 : Garage
ShelfType : Tiered Shelf
Size : 2 Tier Filament Rack
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 39100000
Voltage : 24 volts