Cart 2 india

Specification
ActiveIngredients : 过氧化脲
Brand : KOYOFEI
BulletPoint : ALLSOURCE Economy Spot Blaster,80-125 PSI 4001344
BulletPoint1 : Flexible and Magnetic Platform: The surface of the steel plate is machined by CNC drawing, which has good adsorption force to prevent the model from falling off during printing.
BulletPoint2 : Robust and durable stainless steel material: The magnetic printing platform is made of high quality stainless steel material and has good elasticity. After bending and removing the model, it can be quickly returned to its original state and reused.
BulletPoint3 : Size information: The size of the magnetic steel plate is 172x110mm, which is compatible with Photon M3, and the thickness of this platform is 2.7mm, the printing height will be reduced 2.7mm. You can print a spacer to compensate the difference. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results.
BulletPoint4 : Unique handle design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform.
BulletPoint5 : Installation Tips: First prepare a 2.7mm spacer to aovid the Z axis can not return to the zero. Next clean your build plate very well, let it dry, connect your magnet base to the plate, let it sit for a at least 48 hours so it is fully attached to the plate, next install the spring steel plate on the magnetic base, last reset the printer's leveling settings to start printing .
Color : Black
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
CompatibleMaterial1 : Resin
CompatibleMaterial2 : Alloy Steel
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 746340033185
ExternallyAssignedProductIdentifier2 : 0746340033185
FinishType : Finish
GradeRating : commercial
IncludedComponents : inc
ItemDisplayWeight : 20 pounds
ItemForm : Strip
ItemName : KOYOFEI Resin 3D Printer Flex Build Plate for Anycubic Photon M3, Spring Steel Flexible Plate and Magnetic Base Platform for Photon M3 172x110mm
ItemPackageDimensions_Height : 24.7904 centimeters
ItemPackageDimensions_Length : 1.1938 centimeters
ItemPackageDimensions_Width : 15.7988 centimeters
ItemPackageQuantity : 1
ItemShape : Tubular
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : KOYOFEI
Material : Resin
MeasurementSystem : English/Standard
MetalType : Brass
ModelName : Zeronet6no92aquy-12
ModelNumber : Zeronet6no92aquy-12
NumberOfBoxes : 1
NumberOfItems : 2
PartNumber : KYF-3D-178
PowerSourceType : PowerSource
ProductBenefit : Cleansing
ProductDescription :

LCD/DLP Resin 3D Printer Magnetic Build Plate for Anycubic Photon M3

Installation Notes:

1.Prepare a 2.7mm spacer to aovid the Z axis can not return to the zero.

2.Please clean your build plate thoroughly, let it dry.

3.Please connect your magnet to the plate, let it sit for a couple of hours（More than 24 hours is better）so it is fully seated.

4.Please install the spring steel plate on the magnetic base

5.Please reset the printer's leveling settings to start printing

Skills in use:

1.When installing the soft magnetic sheet, it is necessary to ensure that the printing platform is clean and dry. After installation, it is best to keep it in an inverted state, or it can be fixed with a clamp to ensure that the soft magnetic sheet is fully attached to the printing platform.

2.Please ensure spring steel is completely aligned with the magnetic base to avoid the resin entering the gap during use, which will affect the magnetic force of the soft magnet and cause the spring steel plate to fall off.

3.If there are burrs on the surface of the spring steel, please use sandpaper carefully to make sure that there are no burrs before using it to prevent the burrs on the spring steel from piercing the FEP film during the printing process.

4.After printing, do not excessively bend the spring steel when removing the model. After use, use alcohol or cleaning fluid to remove the residual resin on the surface.

5.After using for a period of time, if the model falls off the spring steel sheet during the printing process, you can sand the spring steel sheet with sandpaper to ensure that it has sufficient adhesion.

Package includes: 2PCS spring steel build plate+ 2PCS soft magnetic sheet

ProductSiteLaunchDate : 2023-06-09T03:17:26.739Z
Size : 172x110mm
SpecificUsesForProduct : Sandblasting
Style : CORDLESS
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 23261500