Cart 2 india

Specification
Brand : kweiny
BulletPoint : 3D Printer A4988 DRV8825 Stepper Motor Control Board Expansion Board
BulletPoint1 : Compatibility: Matches all 3D print extruder heater block offered from E3D Makerbot, MK8 Makerbot RepRap , etc.
BulletPoint2 : High temperature resistance: Both PTFE tape and heat insulation cotton, short term resistance to temperature 300 degrees Celsius (572 Fahrenheit ), long term resistance to temperature 260 degrees Celsius (500 Fahrenheit )
BulletPoint3 : Function: Keep heater block temperature constant, so that improving print quality, save electricity and prolong the service life of heater and temp sensor
BulletPoint4 : Use-method: You can cut cotton into the right size and hole according to your needs, then stick it firmly with PTFE tape. 5 sides of heater can be wrapped up in cotton, except the surface installed heater wire, but you just need to use 1 piece cotton. You can also use PTFE tape to stick any other parts on your 3D printer
BulletPoint5 : Material: The heating insulation cotton is made from heat resistant ceramic fiber, the tape is made from PTFE
BulletPoint6 : 【Application】 Compatible with Bambu Lab A1,A1 Mini Combo. If need to use on other size 3D printer. Please measure your printer size before ordering.
Color : Yellow
CompatibleDevices : 3D Printer
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
ExternallyAssignedProductIdentifier1 : 732140926765
ExternallyAssignedProductIdentifier2 : 0732140926765
IncludedComponents : 1 Set Enclosure Cover
ItemName : Kweiny Heat Insulation Cotton 10PCS and PTFE High Temp Tape for 3D Printer Makerbot Hotend
ItemPackageDimensions_Height : 16.002 centimeters
ItemPackageDimensions_Length : 1.1938 centimeters
ItemPackageDimensions_Width : 7.0104 centimeters
ItemPackageQuantity : 11
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : xingzhu
Material : Cotton
ModelName : Tarshyry0fqabnwc7y
ModelNumber : 3D Printer
NumberOfBoxes : 1
NumberOfItems : 10
PartNumber : XZ-3DCT11
ProductDescription : Notice:
1. After replace the nozzle, Please recalibrate the distance between nozzle and build plate to ensure the quality of print parts;
2. Please do not use flame to test their heat resistance, because the flame's temperature is much higher than 300 degrees Celsius (572 Fahrenheit ).

Size:
Heat insulation cotton: Length 80mm/3.15in, width 20mm/0.78in, thickness 2mm;
PTFE high temp tape: Total length 10m/32.8ft, width 8mm, thickness 0.13mm

package including:
10PCS heat insulation cotton;
One Roll of PTFE High Temp Tape
ProductSiteLaunchDate : 2017-10-11T07:00:00.000Z
Size : A1 Enclosure with Exhaust kit
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31201500