Cart 2 india

Specification
AgeRangeDescription : adult
Brand : UniTak3D
BulletPoint1 : ⭐Original Part:This UV resin vat tank with ACF film is the original replacement for ANYCUBIC Photon Mono M5s & Mono M5s Pro 3D Printer. Not for Mono M5.
BulletPoint2 : ⭐Material:This Mono M5s/M5s Pro resin vat is made of durable full metal frame for longer service life.
BulletPoint3 : ⭐Pre-assembled ACF Film: High temperatures resistant up to 204℃ and over 95% light transmittance.
BulletPoint4 : ⭐Replacement Kit:This spare resin vat will be a perfect choice to save time when you need to begin a new print.
BulletPoint5 : ⭐Easy Installation:Please tear off the protective film before use.It is suggested to use it combined with the screen protector.
BulletPoint6 : Consistent and uniform temperatures: Unlike a standard heating block, where the heating element is installed at one end of the heating block, our cylindrical heating element distributes heat evenly and precisely. At the same time, the NTC 100K thermistor inside the block gives more accurate readings than in other systems where it is installed further away.
BulletPoint7 : Easy installation: Installation on your 3D printer is very easy. By default it is M6 metric compatible with most domestic and professional FDM 3D printers such as the Prusa i3. In a few seconds you can start heating the system. However, it is advisable, as with any modification to your machine, to perform the appropriate checks.
CareInstructions : Dry Clean Only
Color : black
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
CompatibleGrooveDiameter : 22 millimeters
CompatibleMaterial1 : Acrylonitrile Butadiene Styrene
CompatibleMaterial2 : Polylactic Acid
CompatibleMaterial3 : Nylon
CompatibleMaterial4 : Polyvinyl Alcohol
Department : mens
ExternallyAssignedProductIdentifier : 3002984479824
ExternallyAssignedProductIdentifier1 : 824007539772
ExternallyAssignedProductIdentifier2 : 0824007539772
FabricType : Steel Plate
FinishType : Plain
GpsrSafetyAttestation : 1
IncludedComponents : No
ItemName : Original Photon Mono M5s/M5s Pro Resin Vat 10.1inch Metal UV Resin Tank with 1Pc Pre-Installed ACF Film Compatible with Anycubic Photon Mono M5s/M5s Pro LCD,NOT for Photon Mono M5
ItemPackageDimensions_Height : 32.1056 centimeters
ItemPackageDimensions_Length : 7.6962 centimeters
ItemPackageDimensions_Width : 22.5044 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : UniTak3D
Material : Stainless Steel
Material1 : ABS
Material2 : Plastic
ModelName : YP24062803
ModelNumber : YUKOFE38xhfwgpc9
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 12
OperatingSystem : Linux
PackageLevel : unit
PartNumber : Uni130M5S
Pattern : Solid
ProductDescription : [ACCURATE 3D PRINTER CONTROL] With the TMC2209 motor driver, achieve precise control over your 3D printer effortlessly.
[EASE OF USE] Supports uart mode with jumper caps for easy setup on MKS SGEN L V1.0 and MKS GEN L V2.0.
[EFFICIENT PERFORMANCE] Enjoy sensorless feedback for high sensitivity and .
[QUIET ] Experience noise- printing with a simple and flexible installation process.
[EFFECTIVE COOLING] Includes a heat sink for fast cooling to maintain stability and reliability during use.

Spec:
Item Type: Step Motor Driver
Features: Ultra quiet, high current, 256 microstep subdivision, good heat dissipation effect, UART mode support, use with MKS SGEN-L, without jumper. TMC2209 has all the functions of TMC2208. It can completely replace TMC2208. At the same time, it has less heat, can support higher current, the maximum peak current can get to 2.5A, and infinite 0 return.
Material: Aluminum alloy, PCB.
Default Current: 1.25A
Maximum Current: 2.5A
Logic Voltage: 3.3V, 5V.
Input Voltage: 5.5V-28V.
Microsteps: Up to 1/256.
Mode: Dir/step, uart.


Package List：
5 x Step Motor Driver5 x Heat Sink

Note：
1. Before installing the hard disk, be sure to disconnect the power supply to prevent the hard disk from burning.
2. Before installing the drive, make sure to confirm the direction of the drive to prevent the drive from burning due to reverse connection.
3. Do not plug or unplug the drive module when there is power supply to avoid damage.
4. When installing the heat sink, pay attention to the between the heat sink and the pin. Stop the drive short circuit.
5. This product is sensitive to static electricity, please handle it carefully when using, and it is better to move again when using.
6. Verf measures the voltage between Gnd and potentiometer.
7. Do not connect the motor when measuring the voltage, otherwise the driver will be easily burnt.
ProductSiteLaunchDate : 2023-08-18T06:36:07.504Z
ShipsGlobally : 1
Size : 10 x 20 mm
SkipOffer : 1
Style : Photon Mono M5s & M5s Pro
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 44101700
Voltage : 24 volts