Cart 2 india

Specification
Brand : TMYPN
BulletPoint1 : Compatible Models: The 202x128mm flexible build plate is compatible with Anycubic Photon X / Photon Mono X, Mono X 6K, Mono X 6Ks, M3 Plus, Sainsmart KL-9. This steel build plate can also be used with other printing platforms of similar size. Ensure you measure your platform for compatibility.
BulletPoint2 : Packing List: The package includes 2 flexible build plates (thickness: 0.5mm) and 1 magnetic sticker base (thickness: 2mm). If you encounter any quality issues, feel free to contact us. We will respond and resolve the issue as soon as possible.
BulletPoint3 : Installation Method: Clean and dry the printing platform thoroughly. Attach the magnetic base and let it sit for optimal adhesion (preferably for more than 24 hours). Then, install the spring steel plate. Finally, reset and level the printer. It is recommended to print a 3.8mm thick spacers to facilitate proper zeroing of the Z axis.
BulletPoint4 : High Durability: The flexible steel plate, featuring high chromium content for durability and rust prevention, is easy to bend and clean. Its brushed surface enhances adhesion for perfect prints. Unlike traditional platforms, this flexible board allows easy model removal by bending, minimizing print damage.
BulletPoint5 : Ergonomic Design: The magnetic printing platform includes an ergonomic handle for easy installation and removal, ensuring smooth operation. This user-friendly design reduces the risk of print damage during removal, and the magnetic base provides strong adhesion to keep models secure during printing.
ItemName : TMYPN Resin 3D Printer Build Plate for Anycubic Photon X/Photon Mono X, Mono X 6K, Mono X 6Ks, M3 Plus, 2pcs Flexible Spring Steel Sheet and 1pcs Magnetic Base for 202 x 128mm 3D Printer Platform
ItemPackageDimensions_Height : 22.8092 centimeters
ItemPackageDimensions_Length : 1.4986 centimeters
ItemPackageDimensions_Width : 16.7894 centimeters
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : TMYPN
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : TN0100
ProductDescription : Product Name: Build Plate

Building Plate Size: 202x128mm

Building Plate Thickness: 0.5mm

Magnetic Base Thickness: 2.0mm

Materials: Spring Steel + Soft Magnet

Compatible Models: for Anycubic Photon X, Photon Mono X, Mono X 6K, Mono X 6Ks, M3 Plus, Sainsmart KL-9

Package Included: 2 Flexible Build Plates + 1 Magnetic Sticker Base

Note::

Prior to installing the magnetic sheet, ensure the printing platform is thoroughly cleaned and dried. Following installation, it is advisable to keep it inverted or secure it with a clamp to guarantee its complete adherence to the platform. Let it sit for a couple of hours (more than 24 hours is preferable).

Ensure the spring steel aligns precisely with the magnetic base to prevent resin infiltration into any gaps, which may compromise the magnetic force and cause the spring steel plate to detach.

If there are sharp edges or burrs on the surface of the spring steel, carefully sand them down using sandpaper to avoid puncturing the FEP film during the printing process.

When removing the printed model, avoid excessive bending of the spring steel. After use, utilize alcohol or a suitable cleaning agent to eliminate residual resin from the surface.

If the model detaches from the spring steel sheet during printing after prolonged use, gently sand the spring steel sheet with sandpaper to restore its adhesive properties.
ProductSiteLaunchDate : 2024-06-27T17:53:47.927Z
Size : Photon X, Mono X/ X 6K/ X 6Ks, M3 Plus (202x128mm)
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31160000