Cart 2 india

Specification
AssemblyInstructions : Included
Brand : uxcell
BulletPoint1 : Precise Design--The 1.75mm Input 0.2mm,0.4mm,0.6mm,8mm,1mm extruder nozzles can produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking the filament with a rounded chamfer.
BulletPoint2 : Cleaning Needles---The nozzle cleaning needles are very flexible and robust, easy to bend the needle into the nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
BulletPoint3 : Material---The 3D printer nozzle are made of Stainless Steel material, Against rust or erosion, sturdy and durable, connect with M6 out the thread, easy to install.
BulletPoint4 : Applicability and compatibility--- Fit for 3D Printer, compatible with all 1.75mm PLA ABS 3D printer.
BulletPoint5 : Note---After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
Color : Silver
CompatibleDevices : PC
ConnectivityTechnology : USB
ControlMethod : touch
ExternallyAssignedProductIdentifier1 : 792585351195
ExternallyAssignedProductIdentifier2 : 0792585351195
HardwareInterface : usb
IncludedComponents : 5 x 3D Printer Nozzles
ItemName : uxcell 5pcs 3D Printer Nozzle Stainless Steel MK8 Nozzle M6 0.2mm,0.4mm,0.6mm,8mm,1mm,Extruder Print Head for 1.75mm 3D Printer
ItemPackageDimensions_Height : 15.24 centimeters
ItemPackageDimensions_Length : 1.143 centimeters
ItemPackageDimensions_Width : 9.779 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : uxcell
Material : Polyester
MemoryStorageCapacity : 64 KB
ModelName : a190808
ModelNumber : a19080800ux0015
NumberOfDrivers : 1
NumberOfItems : 5
PartNumber : a19080800ux0015
PrinterOutput : Monochrome
PrintMediaType : labels
ProductDescription : Feature:
Stamp size on the surface, convenient to pick the one you need.
The hole of the print nozzle is consistent in size and machining, the thread is clean and well-formed.
Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.

Specification:
Fit for 3D Printer: MK8
Material: Stainless Steel
Screw Thread: M6
Thread Length: 5mm
Nozzle Diameter: 0.2mm-0.4mm-0.6mm-0.8mm-1.0mm
Input Diameter: 2mm
Fit Filament Diameter: 1.75mm
Overall Size: 13 x 6 mm / 0.51 x 0.24 inch (L*D)

Package Content:
1 x 0.2mm Nozzle
1 x 0.4mm Nozzle
1 x 0.6mm Nozzle
1 x 0.8mm Nozzle
1 x 1mm Nozzle

NOTE: After replacing the nozzle, please recalibrate the distance between the nozzle and build plate to ensure the quality of print parts.

How to Replace Nozzles?
1: Turn on the 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
2: After heat finishing, close the printer, take a spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.
Notice: Please don’t touch the old nozzle and heat block
3: Spanner keeps to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

ProductSiteLaunchDate : 2019-09-17T07:30:56.304Z
SeriesNumber : 100
Size : 18.9''W x 17.7''D x 16.5''H
SpecificUsesForProduct : 3D Printing with PLA and ABS Filaments on MK8 3D Printer
StrapType : Drawstring
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44103100
WarrantyType : limited warranty
WaterResistanceLevel : waterproof