Cart 2 india

Specification
Brand : Midzooparts
BulletPoint : 2004 LCD Display 3D Printer Reprap Smart Controller Reprap Ramps 1.4 Control 3D Printer Part 20x4 Display 2004LCD
BulletPoint1 : The intelligent controller includes an SD card reader, rotary encoders and a 20-character times 4 line LCD display.
BulletPoint2 : You can easily connect it to your RAMPS 1.4 board using "smart adapter" included.
BulletPoint3 : This panel connect your RAMPS 1.4, you do not need your computer, your SD card intelligent controller power supply.
BulletPoint4 : All further operations, such as calibration, the axis movement can be done only with a rotary encoder intelligent controller.
BulletPoint5 : 3D design print without a computer, just use the G code design stored on the SD card.
Color : Red
ExternallyAssignedProductIdentifier : 4653017435561
ItemName : 2004 LCD Display 3D Printer Reprap Smart Controller Reprap Ramps 1.4 Control 3D Printer Part 20x4 Display 2004LCD
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-controllers
Manufacturer : Midzooparts
NumberOfItems : 1
PartNumber : XHLModulepart_10879
ProductDescription : The RAMPS LCD2004 suite contains the following:
1 1.RAMPS LCD2004 motherboards
2.L type switch board 1
2 lines of 3.FC line
Notes:
can be inserted into SD card offline printing, SD card, please own, this product does not contain!

Technical support and assurance:
In line with the official Wiki products!
Electricity test will be conducted before shipment, so that it can be used formally before delivery.

Product features:
1. using a large screen LCD 20044 lines per line of 20 characters
2. back integrated SD card holder, slice file into SD card, select corresponding files on LCD to print.
3. the product has its own encoder, which can realize parameter adjustment and file selection printing.
Plug and play is available on 4.ramps, but firmware needs to be modified to support it.
Product
Descriptions:
The intelligent controller contains a SD card reader, a rotary encoder and a 20 character 4 line LCD display screen. You can easily connect it to your RAMPS 1.4 board using the "smart adapter".
After this panel connects to your RAMPS 1.4, you do not need your computer, your SD card smart controller is powered. Further operations, such as calibration and shaft motion, can be done by using the intelligent controller of rotary encoders. There is no need for computer print 3D design. It only needs to be stored in SD card with G code.
ProductSiteLaunchDate : 2021-12-23T17:50:48.755Z
UnitCount : 1
UnspscCode : 26000000
Voltage : 12 volts