Cart 2 india

Specification
Brand : Yunseity
BulletPoint1 : Applicable : Our ESP32 3D printer motherboard for MKS TinyBee MINI12864 is a good replacement part for old and broken parts.
BulletPoint2 : and Module: 3D printer motherboard adopts ESP32 ROOM 32U module, embedded core 32 bit high speed MCU, clock up to 240MHz, and integrated , module, the performance is very powerful.
BulletPoint3 : Adapted Firmware: This is a 3D printer main control board with ESP32 on board, supports for Marlin2.0 firmware, supports for MKS MINI12864V3 in addition to the common LCD2004,12864 screen.
BulletPoint4 : Support Serial Screen: The 3D printer control board supports for MKS TFT serial screen. It can update firmware via USB, connect to and web page to control printing.
BulletPoint5 : Memory Chip: In addition, the module has a built in 8Mbyte flash memory chip to provide effective for more application scenarios.
Color : Green
CompatibleMaterial : Wood
ExternallyAssignedProductIdentifier : 9354448688759
ExternallyAssignedProductIdentifier1 : 045995895248
ExternallyAssignedProductIdentifier2 : 0045995895248
IncludedComponents : No
ItemName : 240MHz 3D Printer Motherboard, 3D Printer Main Control Board DC12-24V Anti Reverse Connection 520Kb for DIY
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 13 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-controllers
Manufacturer : Yunseity
Material : Diamond Abrasive Emulsion
ModelName : 0.25 Micron
ModelNumber : Yunseitya3kfvphr0g
NumberOfItems : 1
PartNumber : Yunseitya3kfvphr0g
ProductDescription : 1. Adapted Firmware: This is a 3D printer main control board with ESP32 on board, supports for Marlin2.0 firmware, supports for MKS MINI12864V3 in addition to the common LCD2004,12864 screen.
2. Support Serial Screen: The 3D printer control board supports for MKS TFT serial screen. It can update firmware USB, connect to and web page to control printing.
3. and Module: 3D printer motherboard adopts ESP32 ROOM 32U module, embedded core 32 bit high speed MCU, clock up to 240MHz, and integrated , module, the performance is very powerful.
4. Memory Chip: In addition, the module has a built in 8Mbyte flash memory chip to provide effective for more application scenarios.
5. Applicable : Our ESP32 3D printer motherboard for MKS TinyBee MINI12864 is a good replacement part for old and broken parts.

Spec:
Item Type: 3D Printer Motherboard
Material: PCB
Mcu: ESP32 WROOM 32U
MCU: Frequency 240MHz
Flash: 8192K
: 520Kb
Power Input: DC12-24V Less Than 20A
Heater Head, Hot Bed: 2 Heater Heads, 1 Hot Bed
Temperature Measurement: 3NTC100K: TH1, TB,TH2 (Need Jumper To Select)
Controllable Fan: 2 Way Controllable Fan
Motor Interface: 5 Axes Drive, 6 Motor Interface (Dual Z Axes Parallel Output)
Drive Mode: STEP Or DIR Standard Touch
Drive : Pin Way To The , Support External
Subdivision Settings: Dip Switches To Set The Subdivision
LCD Interface: Support Ordinary LCD2004,12864 Support for MKS MINI12864V3
Serial Port: Reserved Serial Port 2, Support for MKS TFT Series Serial Screen
Limit: X,Y,Z,MT DET
3D TOUCH: Support
Power : Anti Reverse Connection And Power Spike
Firmware: For Marlin2.0.X
Firmware Update Method: Online Download USB

Package List:
1 x 3D Printer Motherboard

1 x USB Cable

ProductSiteLaunchDate : 2024-03-20T16:42:03.510Z
Size : 7 ml
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43201513