Cart 2 india

Specification
Brand : Anncus
BulletPoint1 : Color: 120A 50V
BulletPoint2 : frequent commutation of 12VDC or 24VDC DC motors, the rated working current of the motor does not exceed 6A:
BulletPoint3 : Q: What is the difference between this product and the general forward and reverse switching devices?
BulletPoint4 : A: This product is isolated, and the general products are not isolated. Isolation means that the signal at the control end is isolated from the motor and has no electrical connection.
Color : 120A 50V
ItemName : Anncus 120A/150A/200A 50V Isolated DC Motor Forward and Reverse Control Module High Power DC Motor Commutation Controller Power Supply - (Color: 120A 50V)
ItemTypeKeyword : 3d-printer-controllers
Manufacturer : Anncus
PartNumber : ACS-D9E51ABF2EF56BBBB59C3082F6259F56
ProductDescription : 50A Isolated DC Motor Forward and Reverse Control Module High Power DC Motor Commutation Controller Power Supply
Current needs 5 times the margin
Withstand voltage needs 2 times the margin
A small-volume DC motor forward and reverse module is also available!
Scope of Applications: frequent commutation of 12VDC or 24VDC DC motors, the rated working current of the motor does not exceed 6A:
Q: What is the difference between this product and the general forward and reverse switching devices?
A: This product is isolated, and the general products are not isolated. Isolation means that the signal at the control end is isolated from the motor and has no electrical connection.
There is no contact inside the product, no spark and no noise. It is suitable for frequent forward and reverse starting operation of DC motor, for example, switching between positive and negative twice in 1 second.
The input control signal of this product has an interlock function, and when the signal is input, the motor will stop rotating.
Q: What are the advantages of using isolation?
A: When the DC motor rotates, it will generate interference signals on the power supply (RF signal, sudden voltage, and can be observed with an oscilloscope). If the control signal is not completely isolated, the interference signal is fed back to the control terminal, which may cause the signal source of the control terminal to be generated. Malfunctions (such as running dead, etc.).
Q: What is the voltage drop on the module?
A: The pressure drop is around 0.1V. Because the pressure drop is small, the module is basically not hot.
Q: What is the working principle of this product?
Q: Which model should I use?
A: This product has two parameters, withstand voltage and withstand current. The withstand voltage is 2-3 times of the actual voltage of the motor. the withstand current is preferably 5 times of the actual current of the motor.
Selecti
ProductSiteLaunchDate : 2023-03-10T15:56:02.146Z
UnspscCode : 26111500