Cart 2 india

Specification
AgeRangeDescription : adult
Brand : BIGTREETECH
BulletPoint : Drivers
BulletPoint1 : Why use EZ Drivers? Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users
BulletPoint2 : The newly developed board frame is used to match the new connector to improve the user experience. Using a new customized heat sink, while enhancing the heat dissipation capacity, it protects the driver chip from external damage
BulletPoint3 : Support StealthChop, which can realize the mute lock of the motor and the mute when running at low speed. It is recommended to select when the maximum speed of the motor is lower than 300RPM
BulletPoint4 : Supports SpreadCycle, which can achieve mute and low power consumption in a wide range of speed and torque. It is recommended to select when the maximum speed of the motor exceeds 300RPM
BulletPoint5 : Support StallGuard2: when there is no limit switch, it can be used for motor stall detection (limit switch is recommended)
BulletPoint6 : Value pack product
BulletPoint7 : Expandable bottom
BulletPoint8 : Easy to open
Color : Black
CompatibleDevices : Printer
CoolingMethod : Air
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7364638935985
ExternallyAssignedProductIdentifier1 : 760680041501
ExternallyAssignedProductIdentifier2 : 0760680041501
GpsrSafetyAttestation : 1
IncludedComponents : BIGTREETECH (EZ2209 + EZ-Driver Connection) x5
ItemName : BIGTREETECH New Upgrade EZ2209 Stepper Motor Driver with EZ-Driver Connection V1.0 Support UART Mode for SKR V1.4 Turbo, SKR 2, SKR 3 SKR Pro V1.2, Octopus, Octopus Pro 3D Controller Board (5 Sets)
ItemPackageDimensions_Height : 9.6012 centimeters
ItemPackageDimensions_Length : 3.4036 centimeters
ItemPackageDimensions_Width : 5.6896 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : 3d-printer-controllers
Manufacturer : BIGTREETECH
Material : plated Copper
ModelName : MUOFFQHA
ModelNumber : KINGPRINTER-1010861
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 65
PartNumber : KINGPRINTER-1010861
PowerConnectorType : 2-Pin
ProductDescription : Many users don't understand why to use EZ driver? Also don't understand the benefits of developing EZ drivers.
Because data surveys show that more than 40% of users have damaged drivers due to installation errors. It will directly damage the control board or even cause more damage. If you use EZ Drivers, you can not only reduce this concern, but also improve your experience. Because EZ Drivers adopts the newly developed board and frame and matches the new connector, it allows customers to experience the aesthetic feeling while avoiding the situation that the old driver pins hurt their hands.

Precautions for using EZ2209 Drivers:
1. Be sure to disconnect the power supply before installing the driver to prevent the driver from burning;
2. Before installing the driver, be sure to confirm the direction of the driver to prevent the driver from not working due to reverse connection;
3. Please do not plug or unplug the drive module with power on, so as not to cause damage;
4. The EZ Drivers have installed the heat sink before leaving the factory. Please do not remove the heat sink easily. If there is no thermal conductive material, the heat dissipation effect will be reduced.

ProductSiteLaunchDate : 2022-05-21T07:14:03.635Z
RecommendedUsesForProduct1 : Storage
RecommendedUsesForProduct2 : Packing
Size : DM2282
Style : EZ2209*5+EZ-Driver Connector*5
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500
Voltage : 12 volts_of_direct_current