Cart 2 india

Specification
Brand : BIGTREETECH Direct
BulletPoint1 : Main Control Chip: BIGTREETECH SKR V1.4 turbo control board using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1769 main control chip, the performance has been greatly improved,equipped with highly moduld and open source firmware Marlin2.0, which is convenient for users to DIY and secondary development. and compatible with BTT Pi v1.2/PI2 or CB1/CB2+PI4B, support Klipper firmware.
BulletPoint2 : Multi Function Expansion Interface: BTT SKR V1.4 turbo mainboard support resume printing while power off, smart filament break detection, automatic shutdown after printing, bLtouch/microProbe V20, eddy auto bed leveling sensor, RGB light. Double z-axis interface, eliminating the trouble of external drive expansion module.
BulletPoint3 : Dual Working Modes Display: BIGTREETECH TFT35 V3.0.1 touch screen display adopt ARM Cortex-M3 series GD32F205VCT6 master controller chip with 32-bit CPU main frequency of 120 MHz, with options for either LCD12864 encoder mode, or the modern colour touch screen style. Supports both SD card and USB stick printing.
BulletPoint4 : Ultra Silent Driver: 5Pcs TMC2209 V1.3 stepper motor driver adopts StealthChop2 allows for no-noise, high-precision chopper algorithm for inaudible motion and inaudible standstill of the motor, making it super quiet during printing. And the flexible microPlyer interpolation unit provides up to 256 subdivisions, which can achieve perfect sinusoidal control even in systems with limited pulse frequency.continuous current of up to 2.0A (with peaks of 2.8A). Voltage ranges from 5.5V to the maximun.
BulletPoint5 : Technical Supports: If you have any problems about SKR V1.4 Turbo +TFT35 V3.0.1+TMC2209 driver kit, please feel free to tell us on Amazon. Our technical supports team will help you solve it
CustomerPackageType : Standard Packaging
IncludedComponents : BTT SKR V1.4 Turbo +TFT35 V3.0.1+5*TMC2209
ItemName : BIGTREETECH SKR V1.4 Turbo Control Board+TFT35 V3.0.1 Touch Screen Display+5Pcs TMC2209 V1.3 Stepper Motor Driver Support Klipper Marlin for Ender 3/V2 CR10 Voron FDM 3D Printer DIY Motherboard
ItemPackageDimensions_Height : 16.2 centimeters
ItemPackageDimensions_Length : 7.9 centimeters
ItemPackageDimensions_Width : 12.9 centimeters
ItemTypeKeyword : 3d-printer-controllers
Manufacturer : BIGTREETECH Direct
Material : PCB
ModelNumber : VVV001870
NumberOfItems : 1
PartNumber : VVV001870
ProductDescription :
※1.【SKR V1.4 Turbo+TMC2209 V1.3 TFT35 V3.0.1 Manual】:Please search BIGTREETECH at GitHub

Description:
※【SKR V1.4 Turbo Motherboard Parameters】 ：
Appearance size: 110*85mm
Mounting size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Logic voltage：DC 3.3V
WIFI module：ESP-01S
Motor driver: Support TMC5161、TMC5160、TMC2209、TMC2225、TMC2208、TMC2130、ST820、LV8729、DRV8825、A4988 etc., independent external motor drive.
Driver working mode support: SPI、UART、STEP/DIR
Motor driver interface：X、Y、Z、E0、E1，5 way（Each has a closed loop drive interface) up to 256 subdivisions

※【TFT35 V3.0 Screen Parameters】 ：
TFT35 V3.0.1 is a medium size, dual-mode, ultra-clear 3D printer display. It is an excellent replacement for the standard 12864 LCD displays. .
Notes:
1. When using 12864 screen mode, connect the port EXP1 and EXP2 to the motherboard. There is no touch function in this mode. (If you want to use the SKR MINI E3 or SKR E3 DIP, just connect EXP3 to the motherboard.) .
2. When using serial port screen mode, connect with TFT or aux-2 on the motherboard via RS232. This mode has touch function. .
3. Two work modes can be changed by one key. Press the rotary encoder for about 3 seconds until the mode selection page appears, then press the encoder after selecting the mode.
※【TMC2209 V1.3 Stepper Motor Driver】 ：
TMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. Its continuous drive current is 2A and peak current is 2.8A. Compared with TMC2208, the driving current of this IC is not only improved by 0.6a-0.8a, but also this IC increases the function of locked-motor test.

※If you have any questions,pls feel free to contact us, we will get back to you within 24 hours :)
ProductSiteLaunchDate : 2020-08-06T12:38:24.517Z
Style : BTT SKR V1.4 Turbo +TFT35 V3.0.1+5*TMC2209
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43211900
Voltage : 24 volts_of_direct_current