Cart 2 india

Specification
Brand : BIGTREETECH
BulletPoint1 : TMC5160T Pro stepper motor driver adopts high-power control chip and externally expands power MOS tube, which can support larger current, and the maximum current can reach 8A (because the module is limited by the heating area, the current cannot exceed 5A), and low heat generation when working
BulletPoint2 : Ultra-silent Mode: Supports Trinamics' unique stealthChop2 mode, which eliminates motor noise by reducing resonance and achieves a mute effect
BulletPoint3 : Prevents Motor From Shaking: SpreadCycle high-precision chopping algorithm for highly dynamic motor motion and producing an absolutely clean current wave. Low noise, low resonance and low vibration chopper
BulletPoint4 : Not Easy to Lose Step: Allows the motor to operate near its load and speed limits, enabling 10x or more dynamic range without any out-of-step
BulletPoint5 : Stall detection: By safely detecting the stop action of the motor and replacing a mechanical stop switch, the torque control of the stepper motor or the sensorless return to the origin can be realized. Can drive 57 stepper motors
BulletPoint6 : Multifunctional interface: BTT Octopus V1.1 control board support Eddy V1.0, BLTOUCH, Microprobe auto bed leveling sensor, SFS V2.0 smart filament runout, power loss detection, CEB V1.0, SKSM V1.0, automatic power down. Display support TFT35 E3 V3.0.1/TFT35 V3.0/TFT50/70. When running Klipper touch mode, please choose HDMI5 V1.2 Touchscreen.
ChipsetType : STM32F446ZET6
Color : Red
CompatibleDevices : Personal Computer
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 779605800352
ExternallyAssignedProductIdentifier2 : 0779605800352
GraphicsCardInterface : integrated
IncludedComponents : BIGTREETECH TMC5160T Pro V1.0 (4PCS)
ItemName : BIGTREETECH TMC5160T Pro Stepper Motor Driver Silent Driver Up to 56V Support High-Speed Printing SPI&SD Mode with Heatsink for Manta M8P/M5P/M4P, Octopus Pro, Octopus, SKR 3 EZ Control Board (4 PCS)
ItemPackageDimensions_Height : 14.3002 centimeters
ItemPackageDimensions_Length : 4.4958 centimeters
ItemPackageDimensions_Width : 14.3002 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-controllers
MainPowerConnectorType : 24-Pin
Manufacturer : BIGTREETECH
Material : Other
MemoryClockSpeed : 512 MHz
MemorySlotsAvailable : 2
MemoryStorageCapacity : 512 KB
ModelName : BIGTREETECH Octopus v1.1
ModelNumber : KINGPRINTER-ZZB000574
NumberOfItems : 4
NumberOfPorts : 8
OperatingTemperature : 20 degrees_celsius
PartNumber : KINGPRINTER-ZZB000574
Platform : android
ProductDescription : BIGTREETECH TMC5160T Pro Stepper Motor Driver

Product parameters:
Driver chip: TMC5160-TA;
Product size: 15.3mm*20.4mm;
Power supply voltage (VM): 8V---56V;
Maximum current: 3A (2.54 single row pin allows the maximum current to be 3A);
Maximum segments: 256;
Working mode: SPI mode, SD mode.

Product Advantages:
1. The external power MOS tube can support larger current, the maximum current can reach 8A (because the module is limited by the area, the current cannot exceed 5A);
2. Ultra-silent mode;
3. Small calorific value;
4. Prevent the motor from shaking;
5. Not easy to lose step;
6. Can drive 57 stepper motors.
ProductSiteLaunchDate : 2021-10-19T02:40:33.988Z
Size : Small
Style : TMC5160T Pro*4
SupplierDeclaredDgHzRegulation : not_applicable
SystemBusStandardSupported : SATA 1
TotalUsbPorts : 7
UnspscCode : 26111500
Voltage : 60 volts