Cart 2 india

Specification
Brand : Kuuleyn
BulletPoint : AnkerMake M5 Hotend B2C - UN Silver Iteration 1
BulletPoint1 : 【Integrated Electronic Control】: The RAMPS 1.4 board is designed to integrate all the electronic components required for RepRap into a small package, effectively reducing costs while maintaining functionality.
BulletPoint2 : 【Powerful Platform Connection】: The board connects the Mega controller to the powerful MEGA platform, providing ample expansion space to adapt to different 3D printing needs.
BulletPoint3 : 【Modular Design Advantage】: The RAMPS 1.4 board adopts a modular design, including plug-in stepper drivers and extruder control electronics, which are all located on the MEGA , which is convenient for repair, part replacement, system upgrades and function expansion.
BulletPoint4 : 【Flexible Expansion Capability】: As long as the main RAMPS board is at the top of the system stack, multiple expansion boards can be added as needed, providing a high degree of system customization and expandability.
BulletPoint5 : 【Convenient Program Download】: Supports the use of bootloaders, allowing users to download programs directly to the RAMPS board through the USB interface without relying on other external writers, simplifying the operation process.
ChipsetType : STM32G0B1RET6 or STM32G0B0RET6
Color : Black
CompatibleDevices : Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
CompatibleMaterial1 : Acrylonitrile Butadiene Styrene
CompatibleMaterial2 : Polyethylene Terephthalate Glycol
CompatibleMaterial3 : Resin
CompatibleMaterial4 : Aluminum
CompatibleMaterial5 : Polylactic Acid
CompatibleMaterial6 : Nylon
CompatibleProcessorTypes : ALLWINNER H616
CustomerPackageType : Standard Packaging
DriveSystem : External Hex
ExteriorFinish : Aluminum
ExternallyAssignedProductIdentifier : 6936536852810
ExternallyAssignedProductIdentifier1 : 194644121273
ExternallyAssignedProductIdentifier2 : 194644117290
ExternallyAssignedProductIdentifier3 : 0194644117290
ExternallyAssignedProductIdentifier4 : 0194644121273
FileFormat : STEP
GraphicsCardInterface : integrated
IncludedComponents : No
ItemName : Kuuleyn 3D Printer RAMPS 1.4 Controller, 3D Printer Controller Kit Ramps Board for R3 + A4988 with Heat Sink USB Calbe Jumper Kit
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 17 centimeters
ItemPackageDimensions_Width : 15 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-controllers
MainPowerConnectorType : 24-Pin
Manufacturer : Kuuleyn
Material : Aluminum
MeasurementSystem1 : Imperial
MeasurementSystem2 : Metric
MemorySlotsAvailable : 1
MemoryStorageCapacity : 1 GB
MetalType : Aluminum
ModelName : Saluaquin4fkca3u87
ModelNumber : Kuuleynu6b9we07hs
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
NumberOfPorts : 4
PackageLevel : unit
PartNumber : Kuuleynu6b9we07hs
Platform : no_operating_system
ProductDescription : Features:
The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost.
RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion.


Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Mega is a micro-controller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator.
With the boot-loader, download the program directly via USB without having to go through other external writer.


Development IDE interface is based on open-source principles, allows you to download for use in project work, school teaching, motor control, interactive works.
A4988 driver is a carrier board or breakout board for Allegro's A4988 DMOS micro-stepping driver with translator and Over current Protection by Pololu;
This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.

Specifications:
RAMPS 1.4 Size: 9.1 x 5.9cm / 3.58 x 2.
Boardfor R3Size: 10.8 x 5.5cm / 4.25 x 2.16
A4988 Color: Green
A4988 Quantity: 5pcs

Package Includes:
1 x RAMPS 1.4 Board
1 xBoardforR3
5 x Soldered A4988 Drivers
5 x Heat Sinks
1 x USB Cable
15 x Jumpers



ProductSiteLaunchDate : 2024-08-26T04:33:48.315Z
Size : K1
Style : For Voron 2.4 frame Kit
SupplierDeclaredDgHzRegulation : not_applicable
TotalEthernetPorts : 1
TotalHdmiPorts : 1
TotalUsbPorts : 4
UnitCount : 1
UnspscCode : 26111700