Cart 2 india

Specification
Brand : Reland Sun
BulletPoint : 1 Pcs LCD Controller Board RTD2660 RTD2662 RTD2668 QFP
BulletPoint1 : 3D Printer Mainboard 3D Printer Upgrade Ramps 1.5 Base on Ramps 1.4 Control Panel Board Expansion Board For Cnc Machine
BulletPoint2 : RAMPS 1.4 Control Panel is used as driving shield for 3D printers, and it's easy to stack it onto the MEGA 2560 control board.
BulletPoint3 : For Ramps 1.5 control board, They change the original plug-in MOS tube to patch-type MOS tube in order to solve the problem of plug-in MOS tube easy to break, take up a large area, poor heat dissipation , which can improve the stability and aesthetics of the board.
BulletPoint4 : The Ramps1.6 controller board is changed the original plug-in MOS tube to patch-type MOS tube. Design of Pololu plate pin sockets can be easily replaced or removed for future designs.
BulletPoint5 : WIDELY USED - Suitable for 42/57 stepper motors which are widely used in automatic packaging machine, engraving machine and other automation equipment.
Color : defult
ConnectivityTechnology : Bluetooth
ExternallyAssignedProductIdentifier : 4653023179046
ExternallyAssignedProductIdentifier1 : 0708310866025
ExternallyAssignedProductIdentifier2 : 708310866025
ItemName : Ramps 1.4 1.5 1.6 3D Printer Mainboard Upgrade Control Panel Board Expansion Board for CNC Machine (1.4)
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 14 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-controllers
Manufacturer : RELAND SUN
Material : Material
ModelName : PIM407
NumberOfItems : 1
OperatingSystem : Linux
PartNumber : KKNewIMC_3011
PowerConsumption : 270 watts
ProcessorCount : 1
ProductDescription : Features:
Expand to control accessories.
I2C and SPI pins are available for future expansion.
The features of multiple extended interface and replaceable parts make RAMPS1.6 become a control board with powerful upgrade capability and scalable modularity.
The controller board can be used when the pins on the back of the board are connected to the front is connected to stepper motor drives.
The structure almost same as Ramps 1.5 , the difference is Ramps 1.6 have new 2pin connectors, which more simple and convenient to connect, also will not be burnt easily.
Ramps 1.6 have a good heat sink above MOS tube in order to give a better function to heat dissipation .
the Power of Ramps 1.6 is more larger than Ramps 1.5, the largest power will be up to or 270W.
Voltage: 12V
Power: 270W
Patch MOS Tube: B55NF06
Support Motor Drivers: Support A4988,DRV8825 and other motor drivers(support five motor drivers Simultaneously)


 
ProductSiteLaunchDate : 2022-02-19T09:21:38.100Z
Size : 1.4
UnitCount : 1
UnspscCode : 31160000
Voltage : 12 volts
WirelessCommStandard : bluetooth