Cart 2 india

Specification
Brand : R RADIOSHACK
BulletPoint : 1
BulletPoint1 : Multiple Display Supported: This 3D printer control board can not only support normal LCD2004 and 12864 screens, but also supports for MKS MINI12864 V3 and for MKS TFT serial screens.
BulletPoint2 : Built In For ESP32 DOWD V3 Chip: This 3D printer control board has a built in for ESP32 DOWD V3 chip, for Xtensa dual core, 32 bit LX6 microprocessor, which supports clock frequencies up to 240 MHz.
BulletPoint3 : RGB Backlight Display: This 3D printer control panel features an RGB backlight display, which allows the light color to be changed online.
BulletPoint4 : Self Contained Encoder: This 3D printer control board comes with an encoder for parameter adjustment, and file selection printing.
BulletPoint5 : Powerful Performance: This 3D printer control board has powerful performance, with integrated IFI, Bluetooth module and built in 8M bytes Flash memory chip, which provides effective guarantee for more application scenarios.
ConnectivityProtocol : X-10
ExternallyAssignedProductIdentifier1 : 040293017668
ExternallyAssignedProductIdentifier2 : 0040293017668
IncludedComponents : No
InternationalProtectionRating : IP54
ItemName : SPST 1mS/5VDC Wired Detect Switch
ItemPackageDimensions_Height : 1.27 centimeters
ItemPackageDimensions_Length : 2.54 centimeters
ItemPackageDimensions_Width : 1.778 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-controllers
Manufacturer : RadioShack
Material : PCB
ModelName : Fafeicyiwzt0frgop
ModelNumber : SASKATEc3gfqkhpzr
MountingType : Surface Mount
NumberOfItems : 1
OperatingVoltage : 5 volts
PartNumber : SASKATEc3gfqkhpzr
ProductDescription : Specification:
Item Type: For MKS TinyBee V1.0 Main Board
Material: PCB, Aluminum Alloy
Motherboard Model: For MKS TinyBee V1.0
MCU: ESP32 WROOM 32U
MCU Frequency: 240MHz
Memory: 520K
Input Power: DC12-24V, Heater: 2 Heater Ends And 1 Heater Bed
Temperature ADC: 3 NTC100K: TH1, TB, TH2 ( Jumper Selection Required )
Motor Interface: 5 Axes 6 Motor Interface (Dual Z Axes In Parallel)
Stepping Drive Mode: STEP, DIR Moode
Drive : Support External High Current Drive
Subdivision Setting: DIP Switch
LCD Interface: Support LCD 2004, 12864, For MKS MINI12864 V3
Serial Port: For MKS TFT Series Screen, For USART2 is reserved.
End Stop: X,Y,Z, MT DET
3D Touch: Support
Power : Support Power Reverse and Power Spike
Motor Reverse Potential: Can be absorbed by phase sequence resistor to stepper driver.
Firmware: For Marlin 2.0.X
Firmware Update Mode: U Disk Upload
Memory Card: Shipped Without Memory Card
For MKS Mini12864 V3.0 LCD Graphical Intelligent Display
Model: For MKS Mini 12864 V3
Material: PCB
Logic Level: Support 3.3V, 5V Logic Inputs
Backlight Mode: For Neopixel RGB Adjustable Backlighting
Backlight Adjustment: Light: Slight Preset (For Martin)
Applicable Firmware: For Marlin 2.0, For Klipper
Applicable Motherboards: For MKS Robin Nano V2, For Nano V3, For SgenlV1, v2, For Genl, For Robin E3
packing list:
1 x For MKS TinyBee Control Board
1 x USB Cable
1 x Display For MKS MINI 12864 V3 Storage Card Side Insertion Board
2 x 10 Pin Color Cable
5 x A4988 Stepper Motor Driver
5 x Driver Heat Sink


ProductSiteLaunchDate : 2012-05-01T01:00:52.723Z
SpecificationMet : Ms
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : SPST
TerminalType : Spst
UnitCount : 1