Cart 2 india

Specification
Brand : Three T
BulletPoint1 : 【Direct Drive Extrusion】The direct drive extruder improves extrusion and retraction by removing the need for the Bowden (PTFE) tube.It provides precise retraction and a better printing result.
BulletPoint2 : 【Dual Drive Design】With the dual drive structure,the filament can be gripped much more firmly with less deformation,so it won’t jam as much in the tube, nozzle or hotend which allows more reliable and stable feeding.
BulletPoint3 : 【High Temperature Resistance】All-metal hotend with titanium heatbreak can effectively reduce heat conduction upward from the heating block and allows you to print high-temperature filament at 300℃.Support flexible 1.75 MM filaments,including PLA, TPU, PETG, ABS etc.
BulletPoint4 : 【Efficient Heat Dissipation】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation.You can easily switched heat dissipation modules between air-cooling and water-cooling.
BulletPoint5 : 【Application】This all metal direct drive extruder with motor kit is compatible with Creality Ender 3 S1,Ender 3,Ender 3 V2,Ender 3 Pro,Ender 3 Max Series 3D Printers.NOTE: This Sprite Extruder Pro Kit CANNOT be used with 3D-touch,BL-touch or CR-touch.
Color : White
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
CompatibleMaterial1 : Acrylonitrile Butadiene Styrene
CompatibleMaterial2 : Polyethylene Terephthalate Glycol
CompatibleMaterial3 : Titanium
CompatibleMaterial4 : Metal
CompatibleMaterial5 : Thermoplastic Polyurethane
CompatibleMaterial6 : Polylactic Acid
ExternallyAssignedProductIdentifier1 : 767065419641
ExternallyAssignedProductIdentifier2 : 0767065419641
ItemLength : 3 meters
ItemName : Three T FSFY 11.5cmx6cm 3D Printer Control Panel Module Controller Board Shield Red for Ramps 1.4 Prusa Mendel Reprap
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-controllers
Manufacturer : UniTak3D
Material : 聚四氟乙烯(PTFE)
Material1 : Acrylonitrile Butadiene Styrene
Material2 : Polylactic Acid
ModelNumber : E-HEATER-12V-40W
NominalWallThickness : 2 millimeters
NumberOfItems : 1
PartNumber : FSFYUS_8DZYJ162_GZ
ProductDescription : Fitment:Specification:Size: 11.5cm x 6cm / approx. 4.5in x 2.4in.Features:Brand new and high quality.Fully assembled & tested, no soldering required.It is designed to fit the entire electronics needed for a RepRap in one small package for low cost.The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion.A number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.1PCS * 3D Printer Controller Board For Ramps 1.4 Reprap Prusa Mendel Arduino Red
ProductSiteLaunchDate : 2024-05-14T04:19:52.828Z
Size : 6mm X 8mm
SpecificUsesForProduct : Industrial settings, Chemical processing, Medical applications
Style : 3M
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 9.84
UnspscCode : 25170000
Voltage : 12 volts
Wattage : 40 watts