Cart 2 india

Specification
AgeRangeDescription : adult
Brand : TOOLSGO
BulletPoint1 : Secure Working: There is thermal silicagel between MOS and anodized heat sink, which will further protect PCBA components
BulletPoint2 : Volt Protection: The programmable voltage protection can prevent battery from over discharge and also promises safe working
BulletPoint3 : Heat Dissipation: PCB integrated high current opener, lifting column, CNC custom heat sink, continuous stable overcurrent and more efficient heat dissipation
BulletPoint4 : Good Capacitor: Adopting 220uf 63V electrolytic capacitor to have the excellent filtering effect and stable work performance
BulletPoint5 : Alloy Resistor: Equipped with high accurate alloy resistor to ensure accurate current sampling as well as long service life
Color : One Color
ExternallyAssignedProductIdentifier : 7706790021661
IncludedComponents : No
ItemName : TOOLSGO Motor Control Module Dual Drive Controller Board Brushless FOC BLDC ODESC3.6 Based On O Drive Stable Work Performance
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 19 centimeters
ItemPackageDimensions_Width : 13 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-controllers
Manufacturer : TOOLSGO
ModelName : DWBPGVUN
ModelNumber : TOOLSGOapgd0b8gws
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : TOOLSGOapgd0b8gws
ProductDescription : Specification：
Item Type: Motor Control Module
Material: Phenolic Resin + Brass
Hardware Version: DDESC3.6 Dual Drive
Printed Circuit Board Description: 4 layers, 4 x 20z = 8oz
Applicable Voltage: 8-56V
Current Parameters: 50A holding block, 120A peak.
Support Encoder: Incremental encoder, absolute encoder, Hall sensor, AMT102, AMT103, TLB5012, AS5047.
Communication Interface: USB protocol open sourcing (PC, for Ras pberry Pi, ROS), UART (input device), PWM (RC remote control), STEP DIRECTION (PLC), GPIO, CAN, ANALOG INPUT.
Movement Modes: Speed mode, torsion mode, current mode, position mode, trajectory mode, etc.

Package List：
1 x Drive Board
1 x Power Endurance
1 x XT60 Male Connector
1 x USB Data Cable
2 x 20AWG Endurance Wire
6 x 12AWG Motor Wire
2 x 12AWG Power Cord

ProductSiteLaunchDate : 2025-05-24T05:23:02.736Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 110 volts
Wattage : 500 watts