Cart 2 india

Specification
Brand : HzdaDeve
BulletPoint1 : Compatible Printer: This hotend kit replacement is compatible with Elegoo Centauri Carbon/Centauri 3D printer.
BulletPoint2 : Package Included: 1 set 0.2MM ceramic hotend kit + 1 set 0.4MM ceramic hotend kit + 2PK Extra Silicone Cover + 2PK Nozzle Brushes.
BulletPoint3 : Tungsten Carbide Coated: It has a strong adsorption capacity, effectively preventing molten plastic from sticking to the nozzle.
BulletPoint4 : High thermal conductivity uniform heating: The powerful ceramic heating rod can improve heating efficiency/more uniform heating/faster heat transfer.
BulletPoint5 : Simple Installation: Remove the old hot end and install the new hotend to start. (Heating tube, thermistor, nozzle etc are pre-installed)
BulletPoint6 : Filament material: The print head for Elegoo Centauri Carbon works with 1.75 mm PLA/ABS/PETG/TPU/Wood filament.
BulletPoint7 : Ender 5 plus hot end, white wire was temperature thermistor, red wire was heating tube 24V 40W.
BulletPoint8 : Assembled ender 5 plus high temp hot end：Hotend ender 5 pro. Seamless connected between nozzle and throat, upgraded interior design, no more clogging with long time printing.
Color : black
CustomerPackageType : Standard Packaging
GpsrSafetyAttestation : 1
IncludedComponents : 0.2MM 0.4MM Centauri Carbon
ItemName : HzdaDeve 0.2MM 0.4MM Ceramic Hotend for Centauri Carbon Print Head Extruder Kit Hot End Heat Sink Hardened Steel Brass Nozzle with Extra 2PK Silicone Cover and 2PK Nozzle Brushes for Elegoo (2 Pack)
ItemPackageDimensions_Height : 9.8 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 7.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-extruders
Manufacturer : HzdaDeve
ModelNumber : 0.2mm 0.4mm hotend print head
NumberOfBoxes : 1
NumberOfItems : 2
PartNumber : print head for Centauri
ProductDescription : HzdaDeve 0.2MM 0.4MM Ceramic Hotend for Centauri Carbon Print Head Extruder Kit Hot End Heat Sink with Extra 2PK Silicone Cover and 2PK Nozzle Brushes for Elegoo Centauri (2 Pack)

Specification:
Material: Aluminum + Brass
Filament material: 1.75mm with PLA/ABS/PETG/TPU/Wood
Operating temperature range: -40~+300°C
Simple Installation: Remove the old hotend kit and replace the new one to start. (heating tube, thermistor, nozzle, throat tube, and heating block and silicone cover are pre-installed)
Compatible 3D Printer: for Elegoo Centauri Carbon/Centauri

Package Include:
1 X 0.2MM Ceramic Hotend Kit (Heating sink, heating cartridge, thermistor, nozzle, throat tube, heating block and silicone cover are pre-installed)
1 X 0.4MM Ceramic Hotend Kit
2 X Silicone Cover
2 X Nozzle Brushes

The interior of the nozzle is smooth with burr-free, which not only reduces air resistance and prevents the filament from jamming on the rounded bevel, but also ensures a long service life and makes the filament smoother

After-Sale Service:
If there are any questions, just contact us freely, and a satisfactory solution will be provided within 24 hours
ProductSiteLaunchDate : 2025-05-06T07:24:54.951Z
Size : 4*0.4mm
SkipOffer : 1
Style : 0.2MM+0.4MM
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 40100000