Cart 2 india

Specification
Brand : MECCANIXITY
BulletPoint1 : The hole of print nozzle is consistent size and machining, the thread is clean and well formed.Extruder print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.Input diameter is 1.75mm,Replacing the nozzles regularly will give you a better printing experience.
BulletPoint2 : Fit for 3D Printer: MK8;Material: Hardened Steel;Screw Thread: M6;Nozzle Diameter: 1.0mm;Overall Size(LxD): 13x6mm/0.51x0.24inch;Fit Filament Diameter: 1.75mm;High temperature resistance: 500°C/932°F;Color: Black;Package Content: 4 Pcs x 1.0mm nozzles;
BulletPoint3 : The nozzles kit contains stable materials, high thermal conductivity, high thermal conductivity enables the filament to be heated evenly,The nozzles can withstand high temperature up to 500°C/932°F, fast thermal conductivity, make printing more stable; surface process with good electrical conductivity and anti-corrosion and rust, greatly reducing the adhesion between the filament and nozzle, extrusion is smoother.
BulletPoint4 : 1.Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).2.After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.3.Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.
BulletPoint5 : After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.Do not touch the old nozzle and heating block during replacement to avoid burns.
Color : Black
ItemName : MECCANIXITY 4 Pcs 1.0mm 3D Printer Extruder Nozzles for MK8 1.75mm Filament Hardened Steel Print Head High Speed Temperature Packed Wear Resistance Nozzle (13x6mm)
ItemPackageDimensions_Height : 9.9 centimeters
ItemPackageDimensions_Length : 0.5 centimeters
ItemPackageDimensions_Width : 7.2 centimeters
ItemTypeKeyword : 3d-printer-extruders
Manufacturer : MECCANIXITY
NumberOfBoxes : 1
PartNumber : mea250210ee000265
ProductDescription : What is this?
The hole of print nozzle is consistent size and machining, the thread is clean and well formed.Extruder print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL etc.Input diameter is 1.75mm,Replacing the nozzles regularly will give you a better printing experience.

What will I get?
Fit for 3D Printer: MK8;
Material: Hardened Steel;
Screw Thread: M6;
Nozzle Diameter: 1.0mm;
Overall Size(LxD): 13x6mm/0.51x0.24inch;
Fit Filament Diameter: 1.75mm;
High temperature resistance: 500°C/932°F;
Color: Black;
Package Content: 4 Pcs x 1.0mm nozzles;

Is there any advantages of the product?
The nozzles kit contains stable materials, high thermal conductivity, high thermal conductivity enables the filament to be heated evenly,The nozzles can withstand high temperature up to 500°C/932°F, fast thermal conductivity, make printing more stable; surface process with good electrical conductivity and anti-corrosion and rust, greatly reducing the adhesion between the filament and nozzle, extrusion is smoother.

How to use it?
1.Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
2.After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.
3.Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

What should I notice?
After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.
ProductSiteLaunchDate : 2025-03-11T09:32:44.589Z
Size : 1.0mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44103100