Cart 2 india

Specification
Brand : Micro-Swiss
BulletPoint1 : Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
BulletPoint2 : High Flow CHT - The FlowTech nozzle, equipped with CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec
BulletPoint3 : Better layer adhesion - More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers
BulletPoint4 : Compatible with - The FlowTech CHT nozzle is compatible with all FlowTech hotend models
BulletPoint5 : Orifice size available: 0.4mm, 0.6mm, 0.8mm, 1.0mm
BulletPoint6 : Made in Sweden by Bondtech - Assembled in USA by Microswiss
BulletPoint7 : Ender 5 plus hot end, white wire was temperature thermistor, red wire was heating tube 24V 40W.
BulletPoint8 : Assembled ender 5 plus high temp hot end：Hotend ender 5 pro. Seamless connected between nozzle and throat, upgraded interior design, no more clogging with long time printing.
Color : black
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 850041631479
ExternallyAssignedProductIdentifier2 : 0850041631479
GpsrSafetyAttestation : 1
IncludedComponents : Microswiss FlowTech CHT Nozzle
ItemName : Microswiss FlowTech™ CHT - High Flow Nozzle - Equipped with CHT Technology - Multi Filament Channel Design (0.6mm)
ItemPackageDimensions_Height : 8.7122 centimeters
ItemPackageDimensions_Length : 0.0508 centimeters
ItemPackageDimensions_Width : 4.699 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-extruders
Manufacturer : Microswiss LLC
ModelNumber : M2905
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : M2905-06
ProductDescription : FlowTech CHT High Flow Nozzle Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate. Brass body Plated with Non-stick Composite Additive TwinClad XT Plating High Flow CHT The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec Better layer adhesion More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers Compatible with The FlowTech CHT nozzle is compatible with all FlowTech hotend models Orifice size available: .4mm, .6mm, .8mm, 1.0mm Made in Sweden by Bondtech Assembled in USA by Microswiss
ProductSiteLaunchDate : 2024-05-01T14:00:00.000Z
Size : 0.6mm
SkipOffer : 1
Style : 0.2MM+0.4MM
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 40141700