Cart 2 india

Specification
Brand : Reland Sun
BulletPoint1 : Assembled mk8 extruder come with 4 print nozzles; Diameter: 0.4mm defaulted; 0.2mm, 0.3mm, 0.5mm optional.
BulletPoint2 : It is compatible with most 3d printers with some slight modifications when mounting it.
BulletPoint3 : Filament size: 1.75mm PLA/ABS or other 3d print materials. Flow rate of nozzle:max 100mm/s, support for high speed printing.
BulletPoint4 : high quality stepper motor with larger torque and less heat buildup.
BulletPoint5 : Special ceramic insulation cotton ensure the hotend can heat to a high temperature fast and stably.
Color : 10
CompatibleDevices : PC
ExternallyAssignedProductIdentifier1 : 0739227854645
ExternallyAssignedProductIdentifier2 : 739227854645
ItemName : Reland Sun All Metal MK8 Extruder, 3D Printer Extruders Hotend Kit with 0.2/0.3/0.4/0.5mm Nozzle Print Head for 3D Printer 1.75mm Filament Supported (MK8 Extruder)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 4 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-extruders
Manufacturer : Reland Sun
Material : brass
MemoryStorageCapacity : 64 MB
ModelNumber : b21042402ap0001
NumberOfItems : 10
PartNumber : b21042402ap0001
ProductDescription : NOTE:
Make sure the maximum temperature is less than 280 Celsius.
Thermistor sensor is risky demaged if it is fasten too tight.And please do not be panic if it is fallen out as arrived ,it is easy to reset.
Compatible with most 3d printers with some slight modifications,if you would like to install on A8,please cut the thumb bar of the extruder frame for carriage mounting.

Specification:
Default extrusion nozzle: 0.4mm; 0.2/0.3/0.5mm optional
The material of Print: 1.75mm PLA/ABS/Wood/Flexible
Operating temperature Normal: 190-250 Celsius
Throat: M6 X 30mm
The voltage of heating nozzle: 12V
Cartridge heater: 12V,40W, 1 meter lead
Thermistor: 100K NTC, 1 meter lead
Cooling fan: 12V 4010 fan
Stepper motor wire: 1 meter
The flow rate of Nozzle: about 24cc / h
Sports shaft speed: 40mm/s
Stepper Motor: Nema 17 Stepper Motor, 4 Wires
Number of Phase: 2
Step Angle: 1.8 deg
Rate Voltage: 3.3V DC
Holding Torque:1.5A
Phase Resistance: 2.2ohms±10%?20??
Motor Torque:40Ncm/57.1 oz.in
Phase Inductance: 3.8mH±20%(1KHz)

MK8 Extruder Package Include:
MK8 Extruder X 1+ 0.4mm nozzle
1 x1 Meter stepper motor wire

MK8 Extruder KIT Package Include:
1xMK8 Extruder(0.4mm nozzle)
1x0.2mm/1.75 MK8 nozzle
1x0.3mm/1.75 MK8 nozzle
1x0.5mm/1.75 MK8 nozzle
1 x1 Meter stepper motor wire
ProductSiteLaunchDate : 2021-08-03T10:57:05.876Z
Size : MK8 Extruder
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44103100