Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Precise Design--The 1.75mm Input 0.4mm extruder nozzles can prevent print head from overflow effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.
BulletPoint2 : Cleaning Needles---The nozzle cleaning needles are very flexible and robust, easy to bend the needle into the nozzle and will not break. Good for handle tough extruder hot end nozzle clogs.
BulletPoint3 : Material---The 3D printer nozzle is made of brass material, sturdy and durable, connect with M7 out the thread, easy to install.
BulletPoint4 : Application: Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL, etc.
BulletPoint5 : Note---After replacing the nozzle, please check the distance between the nozzle and build plate to ensure the quality of print parts.
CompatibleDevices : PC
ItemName : uxcell 10pcs 3D Printer Nozzle,Brass Nozzle 0.4mm,Extruder Print Head for Filament 1.75mm M7 3D Printer
ItemPackageDimensions_Height : 14.8 centimeters
ItemPackageDimensions_Length : 0.4 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-extruders
Manufacturer : uxcell
Material : Brass
MemoryStorageCapacity : 64 MB
ModelNumber : a19080800ux0084
NumberOfItems : 10
PartNumber : a19080800ux0084
ProductDescription : Feature:
Stamp size on the surface, convenient to pick the one you need.
The hole of the print nozzle is consistent in size and machining, the thread is clean and well-formed.
Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, PCL, etc.
Specification:

Material: Brass
Screw Thread: M7
Thread Length: 4mm
Nozzle Diameter: 0.4mm
Input Diameter: 4mm
Fit Filament Diameter: 1.75mm
Overall Size: 13 x 9 mm / 0.51 x 0.35 inch (L*D)
Package Content:
10 x Nozzle
How to Replace Nozzles?
1: Turn on the 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).
2: After heat finishing, close the printer, take the spanner to hold the heat block. Then use a socket screwdriver to screw the old nozzle extruder out.
Notice: Please don’t touch the old nozzle and heat block.
3: Spanner keeps to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.

ProductSiteLaunchDate : 2019-10-03T01:59:53.188Z
Size : 0.8mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 41000000