Cart 2 india

Specification
Brand : Wellzoom
BulletPoint1 : Dual-zone + independent temperature control, can be adapted to a wider variety of materials
BulletPoint2 : It may be additionally equipped with water-cooled traction and automatic winder
BulletPoint3 : Simple appearance, easy to operate
BulletPoint4 : Easy to clean the material cavity and change the nozzle
BulletPoint5 : Large-capacity hopper of transparency, you can easily monitor and add material
Color1 : Black
Color2 : Orange
Color3 : Clear
CompatibleDevices : Personal Computer
CompatibleMaterial1 : Acrylonitrile Butadiene Styrene
CompatibleMaterial2 : Plastic
CompatibleMaterial3 : Wood
CompatibleMaterial4 : Polylactic Acid
CompatibleMaterial5 : Nylon
CompatibleMaterial6 : Polyvinyl Alcohol
ExternallyAssignedProductIdentifier1 : 0602716544641
ExternallyAssignedProductIdentifier2 : 602716544641
ItemName : Wellzoom C1 Desktop Filament extruder
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 6 centimeters
ItemPackageDimensions_Width : 4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-extruders
Manufacturer : Shenzhen Mistar Technology Co., Ltd
Material : Plastic
ModelName : Walfrontke691bam82
ModelNumber : C1
NumberOfItems : 1
PartNumber : C1
PowerConsumption : 240 watts
ProductDescription : Wellzoom C-type desktop filament extruder specifically designed for non-professionals. It is based on minimalism, easy to operate.
Based on a variety of technology integration, it becomes the first choice of new plastic testing. The C-type extruder can achieve more mixing of materials, the wider application range. Dual-zone and temperature control independent, the material can be segmented heating control, flexible control the molten state of materials ; Water-cooled traction, can help you control the size of the filament; and automatic winder, the filament was collected into a roll. This is the micro-material extrusion lines.
Specially designed plastic shell is built by handmade.


Parameters:
1.Extrude Rate: 70”~100”/min
2.Diameter: 1.75mm and 3.00mm( 2 nozzles)
3.Adapt material:Nylon,PLA ,ABS, PVA and wood-plastic etc.
4.Working temperature:below 320℃
5.Accuracy of PID: +/- 1℃
6.Temperature zones: two temperature zones (Independent Control)
7.Power:240W
8.Power requirement: 220V,50Hz or 110V,50Hz
9. Hopper capacity:1000ml (transparent)
10. Dimensions: 22”x6.3”x7.9”(Excluding hopper height)
11. Additional accessories: water-cooled traction and automatic winder
ProductSiteLaunchDate : 2016-03-07T08:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 54100000