Cart 2 india

Specification
Brand : SeulQirw
BulletPoint1 : X1, X1C hotend complete kit- hardened steel hot end, 2510 X1 Fan, thermistor, ceramic heater, 0.2/0.4/0.6/0.8mm hardened steel nozzle,heating block replacement. It is compatible with common 3D printing filaments such as PLA and PETG etc.
BulletPoint2 : Unique Integrated Nozzle-The nozzle is integrated into the heat block and connected to the heatsink via a fine metal tube for optimal performance. With this design, the hotend heats up much faster than a traditional hotend, and the integrated structure effectively reduces potential issues when replacing the nozzle.
BulletPoint3 : Integrated Heater & Thermistor Module-The ceramic heater and thermistor are combined into one module with an integrated terminal connector. With this design, the reliability of the terminal connector under extreme conditions is improved.
BulletPoint4 : Fast Heating & Accurate Temp-The ceramic heater can heat the nozzle up to 300℃ while the thermistor has highly accurate temperature measurement and reliable structural design.
BulletPoint5 : Safety Cooling Fan-The cooling fan for hotend has an auto-shutoff function while being locked at rated voltage for 1-3 seconds. The circuit attempts torestartin 2 to 6 seconds. There is no damage after 72 hours of locking.
BulletPoint6 : Compatibility - The product is compatible with bambu lab X1, X1C 3D printers, easy to assemble and install
IncludedComponents : hotend and fan
ItemName : X1 Carbon,X1 X1C Hotend Kit for Bambu lab X1 Series 3D Printer, with Fan, hot end,Thermistor, Ceramic Heater, 0.2/0.4/0.6/0.8mm Hardened Steel Nozzle and Extruder Heating Block Replacement
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 6 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : 3d-printer-extruders
Manufacturer : SeulQirw
ModelName : Ylwxzenithn1ydxize8h
ModelNumber : Ylwxzenithn1ydxize8h
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : HSDS048
ProductDescription : X1, X1C Hotend Kit for Bamboo LAB X1 Series 3D Printer, with Fan, hot end ,Thermistor, Ceramic Heater, 0.2/0.40/0.6/0.8mm Hardened Steel Nozzle and Extruder Heating Block Replacement
ProductSiteLaunchDate : 2025-04-28T02:54:42.349Z
SkipOffer : 1
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 40000000