Cart 2 india

Specification
Brand : Oumefar
BulletPoint : Power Transformers
BulletPoint1 : Fitting: Supports UART mode, the motor drive board is applicable to for MKS SGEN-L without jumper, useful and
BulletPoint2 : Driving Current: Larger driving current, the maximum current can get to 2.5A, and the stable printing current can get to 1.7A.
BulletPoint3 : Easy to Install: Designed to have a light weight and a compact size as well, the TMC2226 motor driver is very simple to install.
BulletPoint4 : 256 Micro Steps: Low in working noises, the internal 16 steps of the stepper motor driver chip is expanded to 256 subdivisions.
BulletPoint5 : Stables Working: Comes with a heatsink, the step motor driver module enables good heat dissipation for higher working stability.
BulletPoint6 : Welcome and I wish you a happy life, my friend.
Color : One Color
CompatibleDevices : Personal Computer
ExternallyAssignedProductIdentifier : 7310411145515
ItemName : Stepper Motor Driver, Step Motor Drive Aluminum Alloy Low Noise for Replacement
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-interface-and-driver-modules
Manufacturer : Oumefar
Material : Copper
ModelName : Oumefarvxpkyna30o
ModelNumber : Oumefarvxpkyna30o
NumberOfItems : 1
OutputWattage : 360 watts
PartNumber : Oumefarvxpkyna30o
ProductDescription : 1. 256 Micro Steps: Low in working noises, the internal 16 steps of the stepper motor driver chip is expanded to 256 subdivisions.
2. Driving Current: Larger driving current, the maximum current can get to 2.5A, and the stable printing current can get to 1.7A.
3. Stables Working: Comes with a heatsink, the step motor driver module enables good heat dissipation for higher working stability.
4. Fitting: Supports UART mode, the motor drive board is applicable to for MKS SGEN-L without jumper, useful and reliable.
5. Easy to Install: Designed to have a light weight and a compact size as well, the TMC2226 motor driver is very simple to install.

Spec:
Item Type: Stepper Motor Driver
Material: Aluminum Alloy
Output Current: 1.78A
Recommended Working Current: 0.8A
Microstep: 256 microstep subdivision
Configuration: STEP, DIR OR UART.
Load Driving Voltage Range: 5.5~38V
IC Logic Working Voltage: 3V, 5V.

How to Use:
1. Please pay special attention to the driving direction, and do not plug it reversely.
2. Do not connect the motor when measuring the voltage, otherwise it is easy to burn the motor.
3. When measuring the voltage, connect the power supply, not just USB power supply.
4. When using on the printer control board, please keep 3pcs jumper cap under the socket.
5. Before adjusting the knob, it must be carried out power off. After the adjustment is completed, the power on measurement shall be carried out to prevent the drive or main board from burning out.
6. When pasting the heat sink, please pay attention to the distance between the heat sink and the pin, or it will cause a short circuit between the heat sink and the leading angle.
7. During working, please do a good job in heat dissipation, such as heat sink and cooling fan, to prevent the abnormal of overheating drive.

packing list:
1 xStepper Motor Driver
1 x Heatsink

ProductSiteLaunchDate : 2024-06-25T09:09:37.252Z
Size : A4988 Red
UnitCount : 1
UnspscCode : 26111500
Wattage : 360 watts