Cart 2 india

Specification
Brand : AnoleX
BulletPoint : NEMA23 Stepper Motor
BulletPoint1 : Closed Loop Stepper Motor for AnoleX CNC 4030-Evo Ultra/4030-Evo Ultra2
BulletPoint2 : Size: 57*57*97mm (excluding shaft)
BulletPoint3 : Speed ​​increased to 6000mm/min, no step loss
BulletPoint4 : Easy to replace, loosen the screws that fix the stepper motor and replace it
BulletPoint5 : Holding torque: 2.2N.m

BulletPoint6 : ✅【How to wiring the 4-lead wire】 Stepper motor's Red wire connects to driver's A+ port; Stepper motor's GREEN wire connects to driver's A- port; Stepper motor's YELLOW wire connect to driver's B+ port; Stepper motor's BLUE wire connect to driver's B- port.
ExternallyAssignedProductIdentifier1 : 0711041524713
ExternallyAssignedProductIdentifier2 : 711041524713
IncludedComponents : Stepper Motor
ItemName : 3Pcs Closed Loop Stepper Motor for AnoleX CNC 4030-Evo Ultra/ 4030-Evo Ultra 2
ItemPackageDimensions_Height : 8.26 inches
ItemPackageDimensions_Length : 8.26 inches
ItemPackageDimensions_Width : 8.26 inches
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-motors
Manufacturer : AnoleX
Material : Alloy Steel
ModelName : ANX-CL-76
ModelNumber : ANX-CL-76
NumberOfItems : 3
PartNumber : ANX-CL-76
ProductDescription : Please Note: When upgrading with the new version 4030-Evo Ultra 2, you need to change the motor cable sequence. That is, swap the green and white wires on one end of the motor cable. For more info, please contact us. Input voltage: 24VDC
Output current (peak): 3.0A
Control signal input current: 10mA
Overvoltage protection: 55VDC
Input signal voltage: 5VDC
Holding torque: 2.2N.m
Size: 57*57*97mm (excluding shaft)
Shaft length: 19mm

ProductSiteLaunchDate : 2024-08-24T07:26:50.347Z
Size : 3.39x3.39x5.87 inch
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26111500
Voltage : 220 volts_of_alternating_current