Cart 2 india

Specification
Brand : TOSEASTARS
BulletPoint1 : Items in Kit: 3 Pcs 3Nm Closed loop stepper motor with 1000line encoder. 3 Pcs Nema 23 Closed loop stepper motor driver. 1 x 350W Power Supply and 1 x Mach3 Card.
BulletPoint2 : Closed Loop Stepper Motor: Holding Torque: 3N.m/300Ncm; Current: 3A; Phase: 2; Motor Length: 57x57x112 mm / 2.24*2.24*4.41 inch; Step Angle: 1.8 degree; Motor Lead Wire: 4-wire; Encoder: 1000 lines; Inductance: 3.5 mH; Resistance: 0.8 (ohm). Stepper motor closed loop system,never lose step.
BulletPoint3 : Parameter of Closed Loop Stepper Motor Driver: Type: DSP Closed loop stepper drive; Maximum peak current: 13A; Impulse response frequency: 200KHz; Input Voltage: 24-80VDC; Micro-stepping driver: 200~25600ppr; Compatible : 4.5~28V signal; Signal input: Support PUL/DIR and CW/CCW modes (difference). This motor driver kit fits all types of machine load conditions without adjusting the gain parameters.
BulletPoint4 : Stable output 24V DC power supply: Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Shell hollow design, heat dissipation ability faster and stronger, more durable performance. AC input voltage range: 110V or 220V AC; selected by switch to choose input voltage.
BulletPoint5 : Functions of the Mach3 Control Board: It supports 5-axis linkage control at most. Strong anti-interference and high reliability. It supports over-current protection, over-voltage protection, position outside the tolerance protection.
Color : As the picture
ExternallyAssignedProductIdentifier : 7603490237326
ExternallyAssignedProductIdentifier1 : 747607258488
ExternallyAssignedProductIdentifier2 : 0747607258488
IncludedComponents : Nema 23 Closed Loop Stepper Motor, Driver, Power Supply, Mach3
ItemName : CNC Controller Kit 3 Axis with Nema 23 Closed Loop Stepper Motor 3 Nm 428 oz.in 1000 Line Encoder Stepper Motor, 24-80V DC Steping Driver, 350W Power Supply Mach3 Control Card for Engraving
ItemPackageDimensions_Height : 39.7002 centimeters
ItemPackageDimensions_Length : 26.3906 centimeters
ItemPackageDimensions_Width : 27.305 centimeters
ItemPackageQuantity : 3
ItemTypeKeyword : 3d-printer-motors
Manufacturer : TOSEASTARS
Material1 : Stainless Steel
Material2 : Aluminum
ModelName : Nema 23 Closed Loop Stepper Motor, Driver, Power Supply and Mach3
ModelNumber : CNC Controller Kit
NumberOfItems : 3
PartNumber : 57HB112-3
ProductDescription : TOSEASTARS 3 Axis Closed Loop Stepper Motor 3Pcs CNC Controller Kit with Nema 23 3 Nm/428oz.in Step Motor and Closed Loop Stepper Driver 1*24V Power Supply S-350-24 USB Mach3 CNC Control Card
ProductSiteLaunchDate : 2025-02-05T16:00:00.000Z
Size : 3Nm
Speed : 1000 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111500
Voltage : 24 volts_of_direct_current