Cart 2 india

Specification
Brand : Eyes.sys
BulletPoint1 : 428oz-in Closed Loop Stepper Motor Kit, 3Nm/428oz.in Nema23 57HSZ3N Stepper Motor & 24-80VDC HSS57 Stepper Driver & Power Cable & Encoder Cable
BulletPoint2 : HBS57 adopts advanced motor control DSP chip and vector loop control technology.
BulletPoint3 : High precision and high speed. Low noise and little vibration, no step to lose.
BulletPoint4 : Overload warning，which has the same reliability as the AC servo system.
BulletPoint5 : Suitable for small and medium-sized automation equipments and instruments.
ExternallyAssignedProductIdentifier1 : 0759747337053
ExternallyAssignedProductIdentifier2 : 759747337053
ItemName : Eyes.sys 428oz-in Closed Loop Stepper Motor Kit, 3Nm/428oz.in Nema23 57HSZ3N & 24-80VDC HSS57 Driver Power Cable Encoder
ItemPackageDimensions_Height : 21.7 centimeters
ItemPackageDimensions_Length : 10.6 centimeters
ItemPackageDimensions_Width : 14.3 centimeters
ItemTypeKeyword : 3d-printer-motors
Manufacturer : Eyes.sys
ProductDescription : Motor Specifications: -Step angle: 1.8degree +/-5% -Phase: 2 phase -Rated voltage: 3.4V -Rated current: 4A -Resistance: 1.15 ohm +/-10%(At 20 degree centigrade) -Inductance: 3.6mH +/-20%/Phase -Hold torque: 3N.m -Insulation: B -Rotor inertia: 800g.cm2 -Weight: 1.4kg Driver Specifications: -Maximum peak current: 5A -Logic Signal Current: 1-16mA -Impulse response frequency: 200Khz -Micro-stepping driver: 200-51200ppr -Voltage: DC24-80V -Signal input: Support PUL/DIR and CW/CCW modes (difference) -Compatible 5-24V signal (Don't need a resistor) -Application temperature: 0-50 degree centigrade -Humidity: 40-90%RH -Shake: 10-55Hz/0.15mm -Pulse input frequency: 200kHz -Isolation Voltage: 500Mohm Packing List: -1 x 57HSZ3N Closed Loop Motor -1 x HSS57 Servo Driver -1 x 3m Power Cable -1 x 3m Encoder cable -1 x User Manual
ProductSiteLaunchDate : 2022-03-02T04:11:17.230Z
UnspscCode : 26111500
Voltage : 24 volts