Cart 2 india

Specification
AgeRangeDescription : adult
Brand : RATTMMOTOR
BulletPoint1 : ✅【23HS2430 Motor Parameter】Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 57 x 57 x 112 mm; Shaft Diameter: 8mm; Holding Torque: 2.8Nm (425oz.in); Phase Resistance: 1.6ohms; Rated Current/phase: 3A; Inductance: 6.8mH+/-20%(1KHz).
BulletPoint2 : ✅【Excellent Performance】It has high torque, the stepper motor's power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
BulletPoint3 : ✅【Advanced Technology】The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
BulletPoint4 : ✅【High Torque 】High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
BulletPoint5 : ✅【Low Noise 】The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.
Color : One Color
Department : Unisex Adult
DsaResponsiblePartyAddress : sales@e-hemm.com
ExternallyAssignedProductIdentifier : 7366667275773
ExternallyAssignedProductIdentifier1 : 754193411753
ExternallyAssignedProductIdentifier2 : 0754193411753
GpsrSafetyAttestation : 1
Horsepower : 44.7 watts
IncludedComponents : Nema 17 Stepper Motor
ItemName : RATTMMOTOR Nema23 Stepper Motor 23HS2430 Single Shaft 57mm×57mm×112mm Stepper Motor 2-Phase, 425oz-in, 8mm Shaft, 1.8°, 3A, 4 Lead Wire for CNC Router Milling Engraving Machine
ItemPackageDimensions_Height : 20.3962 centimeters
ItemPackageDimensions_Length : 9.1948 centimeters
ItemPackageDimensions_Width : 20.2946 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : 3d-printer-motors
Manufacturer : RTM
Material : Steel
ModelName : 23HS2430
ModelNumber : 23HS2430
NumberOfBoxes : 1
NumberOfItems : 2
PartNumber : 23HS2430-3P
ProductDescription : Package Include:
1 × Nema23 stepper motor single shaft 23HS2430

Parameters:
Model: 23HS2430
Shaft: Single shaft, diameter is 8mm
Phase: 2 Phase
Step angle: 1.8°±5%
Motor Size: 57*57*112mm
Voltage: 4.8V
Rated current: 3A/phase
Holding torque: 2.8Nm (425oz.in)
Resistance:1.6Ω±10%/phase
Inductance: 6.8mH±20%/phase
Detent torque: 12N.cm/max
Rotor inertia: 800g.cm²
Insulation: B
Inductance: 3.5mH+/-20%(1KHz)

How to wiring the 4-lead wire:
Stepper motor's Red wire connects to driver's A+ port
Stepper motor's GREEN wire connects to driver's A- port
Stepper motor's YELLOW wire connect to driver's B+ port
Stepper motor's BLUE wire connect to driver's B- port

General Specification:
Step angle accuracy: ± 5%(full step,not load)
Resistance accuracy: ± 10%
Inductance accuracy: ± 20%
Temperature rise: 80deg Max(rated current,2 phase on)
Ambient temperature: 20deg-50deg
ProductSiteLaunchDate : 2023-05-06T06:11:19.888Z
ShipsGlobally : 1
Size : 1PCS
Speed : 800 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26111500
Voltage : 4.8 volts
Wattage : 1.44 watts