Cart 2 india

Specification
Brand : RTELLIGENT
BulletPoint1 : Nema 34 stepper motor, 8.5Nm(1200 oz.in) holding torque
BulletPoint2 : Nema 34 bipolar 86*86*112mm, 4-wire, 1.8 degree, 2 phase
BulletPoint3 : The stepping motor is featuring low vibration, low noise, low heating, high speed
BulletPoint4 : Stage stepper motor 6.0A rated current, resistance 0.55Ohms
BulletPoint5 : Industrial stepper motor for cutting machine, marking machine cnc router motor
ExternallyAssignedProductIdentifier1 : 0791315155256
ExternallyAssignedProductIdentifier2 : 791315155256
Horsepower : 0.55 horsepower
ItemName : RTELLIGENT 86AM85 Nema 34 Stepper Motor 6.0A 8.5N.M (1200 oz.in) 2 Phase 4 Lead for Laser/CNC Machine
ItemPackageDimensions_Height : 19.9 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 13.9 centimeters
ItemPackageQuantity : 1
ItemShape : Square
ItemTypeKeyword : 3d-printer-motors
Manufacturer : RTELLIGENT
Material : Silicone steel
ModelNumber : 86AM85
PartNumber : 86A8
ProductDescription : Our RTELLIGENT stepper motor is specially designed for accurate control of position and speed. The biggest characteristic of step motor is "digital" For each pulse signal from the controller, the stepper motor driven by its runs at a fixed angle ("One step" for short)

Electronic Specification of Step Motor:
◆ Product Model: 86A8
◆ Motor Type: Hybrid, open loop
◆ Step Angle: 1.8°±5% (full step, no-load)
◆ Rated Current: 4.9A
◆ Phase: 2
◆ Number of Lead: 8
◆ Holding Torque: 8.5Nm (1200 oz.in)
◆ Ambient temperature: -10℃ - 50℃
◆ Mounting Position: Axis horizontal or vertical installation
◆ Phase Resistance:0.95Ohm ± 10%
◆ Phase Inductance: 5.2mH ± 20%
◆ Rotor Inertia: 2800g.cm²

Physical Specification of Stepping Motor:
◆ Shaft Diameter: 12.7mm
◆ Motor Body Length: 118mm
◆ Motor Frame Size: 86*86mm
◆ Weight: 3.8kg

Default Connection:
Black (A), Red (B), Green (C), Blue (D)

Wide Application:
The stepping motor is widely use for stage light, medical equipment, labeling machine, cutting machine, laser CNC machine, automatic devices, etc

Package Contents:
1 x 86A8 digital stepper motor

⚠ Warning: Make sure the motor is connected to a constant current or chopper drive controller before testing. Connecting the motor directly to a power supply will destroy it.
ProductSiteLaunchDate : 2019-09-27T07:00:00.000Z
Size : 57HS13
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500
Voltage : 1.9 volts