Cart 2 india

Specification
Brand : STEPPERONLINE
BulletPoint1 : High Torque Good Speed
BulletPoint2 : 0.067 deg. Step Angle
BulletPoint3 : NEMA 17 bipolar 4-wire
BulletPoint4 : Planetary Gearbox Ratio 26.85:1
BulletPoint5 : Rated current 1.68A & resistance 1.65ohms
Color : Smooth PEF+Starry PEY
ExternallyAssignedProductIdentifier1 : 701056502370
ExternallyAssignedProductIdentifier2 : 0701056502370
GradeRating : Industrial
Horsepower : 3 watts
IncludedComponents : H1H
ItemForm : Sheet
ItemName : STEPPERONLINE 27:1 Planetary Gearbox High Torque Nema 17 Stepper Motor 3D Printer DIY Camera
ItemPackageDimensions_Height : 14.7066 centimeters
ItemPackageDimensions_Length : 7.7978 centimeters
ItemPackageDimensions_Width : 8.7122 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : 3d-printer-motors
Manufacturer : OSM Technology Co.,Ltd.
Material : Metal
ModelName : gear
ModelNumber : 17HS19-1684S-PG27
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 17HS19-1684S-PG27
ProductDescription : This high precision NEMA 17 Stepper motor has an integrated Planetary gearbox with a 26.85:1 gear ratio, the resolution reach 0.067 deg. step angle.
It's a good solution in applications that need very low rotation speeds and/or lots of torque.

Electrical Specification:

* Manufacturer Part Number: 17HS19-1684S-PG27
* Motor Type: Bipolar Stepper
* Step Angle: 0.067 deg.
* Holding Torque: 3Nm
* Rated Current/phase: 1.68A
* Phase Resistance: 1.65ohms
* Inductance: 2.8mH+/-20%(1KHz)

Gearbox Specifications:
* Gearbox Type: Planetary
* Gear Ratio: 26.85:1
* Efficiency: 81%
* Backlash at No-load:<=1 deg.
* Max.Permissible Torque: 3Nm(425oz-in)
* Moment Permissible Torque: 5Nm(708oz-in)
* Shaft Maximum Axial Load: 50N
* Shaft Maximum Radial Load: 100N

Physical Specifications:
* Frame Size: 42 x 42mm
* Motor Length: 48mm
* Gearbox Length: 35mm
* Shaft Diameter: 8mm
* Shaft Length: 20mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 500mm
* Weight: 570g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
ProductSiteLaunchDate : 2014-12-01T05:49:25.151Z
Size : A1/X1C/X1/X1E/P1P/P1S
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111500
Voltage : 2.8 volts