Cart 2 india

Specification
Brand : STEPPERONLINE
BulletPoint1 : 3 PCS, Short Height, Small Size
BulletPoint2 : 16Ncm(22.6oz.in) holding torque
BulletPoint3 : NEMA 17 bipolar 1.65"x1.65"x0.79" 4-wire
BulletPoint4 : 1.8 deg. step angle(200 steps/rev)
BulletPoint5 : Rated current 1.0A & resistance 3.5ohms
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0750226819886
ExternallyAssignedProductIdentifier2 : 750226819886
Horsepower : 0.55 horsepower
ItemName : STEPPERONLINE 3 PCS Nema 17 Stepper Motor Bipolar 1.8deg 16Ncm (22.6oz.in) 1A 42x42x20mm 4 Wires for Exturder 3D Printer CNC DIY
ItemPackageDimensions_Height : 25.2984 centimeters
ItemPackageDimensions_Length : 7.6962 centimeters
ItemPackageDimensions_Width : 11.5062 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-motors
Manufacturer : OSM Technology Co.,Ltd.
Material : plastic, metal
ModelName : phase
ModelNumber : 3-17HS08-1004S
NumberOfItems : 3
PartNumber : 3-17HS08-1004S
ProductDescription : This is Short Height Bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution). Each phase draws current 1A, allowing for a holding torque of 16Ncm(22.6oz.in).

Electrical Specification:

* Manufacturer Part Number: 17HS08-1004S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 16Ncm(22.6oz.in)
* Rated Current/phase: 1.0A
* Phase Resistance: 3.5ohms
* Inductance: 4.5mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 42 x 42mm
* Body Length: 20mm
* Shaft Diameter: 5mm
* Shaft Length: 20mm
* D-cut Length: 16.5mm
* Number of Leads: 4
* Lead Length: 400mm
* Weight: 140g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.


ProductSiteLaunchDate : 2014-11-15T08:00:00.000Z
Speed : 500 rpm
Style : Tr8x2
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500
Voltage : 2.8 volts