Cart 2 india

Specification
Brand : STEPPERONLINE
BulletPoint1 : High Torque
BulletPoint2 : 9.5 Ncm(13.5 oz.in) holding torque
BulletPoint3 : NEMA 11 bipolar 1.1"x1.1"x1.75" 4-wire
BulletPoint4 : 1.8 deg. step angle(200 steps/rev)
BulletPoint5 : Rated current 0.67A & resistance 6.8ohms
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 701056335671
ExternallyAssignedProductIdentifier2 : 0701056335671
Horsepower : 3.5 watts
IncludedComponents : Motor
ItemName : STEPPERONLINE Nema 11 Bipolar Stepper Motor 0.67A 14oz.in/9.5Ncm 4 Leads DIY Robot CNC
ItemPackageDimensions_Height : 6.858 centimeters
ItemPackageDimensions_Length : 11.43 centimeters
ItemPackageDimensions_Width : 7.366 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-motors
Manufacturer : OSM Technology Co.,Ltd.
Material : Motor Steel
ModelName : phase
ModelNumber : 11HS18-0674S
NumberOfItems : 1
PartNumber : 11HS18-0674S
ProductDescription : This hybrid bipolar stepper motor has 1.8 deg. step angle (200 steps/revolution).
Each phase draws 670 mA at 4.6V, allowing for a holding torque of 9.5Ncm(13.5oz.in).

Electrical Specification:

* Manufacturer Part Number: 11HS18-0674S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 9.5Ncm(13.5oz.in)
* Rated Current/phase: 0.67A
* Phase Resistance: 6.8ohms
* Inductance: 4.9mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 28 x 28mm
* Body Length: 44.5mm
* Shaft Diameter: 5mm
* Shaft Length: 20mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 500mm
* Weight: 180g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
ProductSiteLaunchDate : 2014-11-15T09:33:16.278Z
Size : Single Shaft
Speed : 500 rpm
Style : 23HS8430
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500
Voltage : 4.6 volts