Cart 2 india

Specification
Brand : STEPPERONLINE
BulletPoint1 : Fine Resolution Short Height
BulletPoint2 : NEMA-14 bipolar 28mm 4-wire
BulletPoint3 : 0.9° step angle(400 steps/rev)
BulletPoint4 : Rated current 0.4A & resistance 2.5ohms
BulletPoint5 : 11Ncm(15.6oz.in) holding torque
BulletPoint6 : PLEASE NOTE: The thick black wire can be used for shielding, but it is not required, so you can leave it unconnected
BulletPoint7 : Suit for 3D printer/CNC machine/Carving Machine/Dispenser/Automation Application
BulletPoint8 : 100% service satisfactory. We provided this stepper motor kit with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 701056352371
ExternallyAssignedProductIdentifier2 : 0701056352371
FocalLengthDescription : 300 millimeters
GpsrSafetyAttestation : 1
Horsepower : 1000 unknown_modifier
IncludedComponents : Nema 23 Stepper Motor
ItemName : STEPPERONLINE Nema 14 Stepper Motor 0.9deg(400 Steps/rev) 0.4A 11Ncm/15.6oz.in Bipolar 4-Wires
ItemPackageDimensions_Height : 11.7094 centimeters
ItemPackageDimensions_Length : 6.9088 centimeters
ItemPackageDimensions_Width : 7.8994 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-motors
Manufacturer : STEPPERONLINE
Material : Steel
ModelName : 14HM11-0404S
ModelNumber : 14HM11-0404S
NumberOfItems : 50
PartNumber : 14HM11-0404S
ProductDescription : This hybrid bipolar Nema 14 stepper motor with 0.9 deg. step angle (400 steps/revolution).
Each phase draws 400 mA at 10 V, allowing for a holding torque of 11Ncm(15.6oz.in).

Electrical Specification:

* Manufacturer Part Number: 14HM11-0404S
* Motor Type: Bipolar Stepper
* Step Angle: 0.9 deg.
* Holding Torque: 11Ncm(15.6oz.in)
* Rated Current/phase: 0.4A
* Phase Resistance: 2.5ohms
* Inductance: 24mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 35 x 35mm
* Body Length: 28mm
* Shaft Diameter: 5mm
* Shaft Length: 24mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 300mm
* Weight: 140g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
ProductSiteLaunchDate : 2014-11-15T09:33:29.147Z
Size : 2.25x2.25x3.94 inch
Speed : 4000 rpm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500
Voltage : 10 volts