Cart 2 india

Specification
Brand : STEPPERONLINE
BulletPoint1 : Nema 17 Stepper Motor with 42Ncm holding troque
BulletPoint2 : Bipolar stepper motor ,dimension 42*42*38mm, 2 phase, 4 leads
BulletPoint3 : Step angle 1.8deg, 200 step/revolution
BulletPoint4 : Rated Current/phase 1.5A & Phase Resistance 2.3ohms
BulletPoint5 : Low noise high speed 3d printer stepper motor, build with 1m Cable and Connector
Color : Matte Black
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8424511432891
Horsepower : 1.5 watts
IncludedComponents : 42-34 Stepper Motor
ItemName : STEPPERONLINE Nema 17 Stepper Motor Bipolar 1.5A 42Ncm 42x42x38mm 1.8deg 4 Wires with 1m Cable and Connector (1 Pack)
ItemPackageDimensions_Height : 11.4046 centimeters
ItemPackageDimensions_Length : 6.7056 centimeters
ItemPackageDimensions_Width : 7.493 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-motors
Manufacturer : STEPPERONLINE
Material : RV40-AB
ModelName : ender
ModelNumber : 17HE15-1504S
NumberOfItems : 1
PackageLevel : unit
PartNumber : 17HE15-1504S
ProductDescription : This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x38mm. It has 4 wires, each phase draws current 1.5A, with holding torque 42Ncm.

Electrical Specification

*Manufacturer Part Number: 17HE15-1504S
*Motor Type: Bipolar Stepper
*Step Angle: 1.8 deg
*Holding Torque: 42Ncm(59.49oz.in)
*Rated Current/phase: 1.50A
*Phase Resistance: 2.3ohms
*Inductance: 4.00mH ± 20%(1KHz)

Physical Specification

*Frame Size: 42 x 42mm
*Body Length: 38mm
*Shaft Diameter: Φ5mm
*Shaft Length: 23.5mm
*D-cut Length: 20mm
*Number of Leads: 4
*Lead Length: 1000mm
*Weight: 280g

Connection

A+: Black, A-: Blue, B+: Green, B-: Red

WARNING

***On some systems, the middle 2 wires on the motor side are swapped. This is easy to fix by slightly prying back the white nubs and swapping the wires. Otherwise they work fine.***

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
ProductSiteLaunchDate : 2022-08-03T07:08:05.182Z
Size : Black-1.8°
Speed : 1 amperes_per_watts
Style : Nema 11 Stepper Motor
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26101200
Voltage : 12 volts