Cart 2 india

Specification
Brand : STEPPERONLINE
BulletPoint1 : Motor Type: Unipolar/Bipolar
BulletPoint2 : Step Angle: 1.8deg
BulletPoint3 : Recommended Voltage: 24-48V
BulletPoint4 : High torque Nema 24 stepper motor
BulletPoint5 : Application: The stepper motor is widely use for 3D printers, medical equipment, laser CNC machine, automatic devices
ExternallyAssignedProductIdentifier1 : 701056539246
ExternallyAssignedProductIdentifier2 : 0701056539246
ItemName : STEPPERONLINE Nema 24 Dual Shaft CNC Stepper Motor 3.1Nm/439 oz.in 8 Leads Bipolar/Unipoar CNC
ItemPackageDimensions_Height : 9.652 centimeters
ItemPackageDimensions_Length : 18.034 centimeters
ItemPackageDimensions_Width : 12.192 centimeters
ItemTypeKeyword : 3d-printer-motors
Manufacturer : STEPPERONLINE
Material : Silicon steel
ModelNumber : 24HS34-3008D
NumberOfItems : 1
PartNumber : 24HS34-3008D
ProductDescription : This high torque Nema 24 stepper motor with 1.8deg step angle (200 steps/revolution).
It with 8 wires, which you can give three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish.
A rear shaft can mount encoder, hand wheel or equals.

Electrical Specification:

* Manufacturer Part Number: 24HS34-3008D
* Motor Type: Unipolar/Bipolar
* Step Angle: 1.8¡ã
* Holding Torque(Bipolar): 3.1Nm(439oz.in)
* Holding Torque(Unipolar): 2.2Nm(312oz.in)
* Rated Current(Bipolar Serial): 2.1A
* Rated Current(Bipolar Parallel): 4.2A
* Rated Current(Unipolar): 3.0A
* Phase Resistance(Bipolar Serial): 2.6ohms
* Phase Resistance(Bipolar Parallel): 0.65ohms
* Phase Resistance(Unipolar): 1.3ohms
* Recommended Voltage: 24-48V
* Inductance(Bipolar Serial): 12.8mH+/-20%(1KHz)
* Inductance(Bipolar Parallel): 3.2mH+/-20%(1KHz)
* Inductance(Unipolar): 3.2mH+/-20%(1KHz)

Physical Specification:

* Frame Size: 60 x 60mm
* Body Length: 87mm
* Shaft Diameter: Φ8mm
* Front Shaft Length: 24mm
* Rear Shaft Length: 20mm
* D-cut Length: 15mm
* Number of Leads: 8
* Lead Length: 600mm
* Weight : 1.4kg

Connection:

RED(A+), YEL(A-), BLU(C+), BLK(C-), WHT(B+), PUE(B-), BRN(D-), GRN(D+)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
ProductSiteLaunchDate : 2015-01-25T08:41:48.000Z
Speed : 4000 rpm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500
Voltage : 48 volts