Cart 2 india

Specification
Brand : Yaregelun
BulletPoint1 : NEMA 17 bipolar 1.65 inch x1.65 inch x2.36 inch 4-wire
BulletPoint2 : This is one of strongest bipolar Nema 17 stepper motor with 1.8 . step angle (200 steps/revolution).
BulletPoint3 : Very High Torque
BulletPoint4 : Each phase draws 2.1A, allowing for a holding torque up to 65Ncm(92oz.in).
BulletPoint5 : [Pack List]: Come with one set of 77.5MM Nema 34 closed loop stepper motor kit with driver and a 3m cable. Welcome to contact us for any question.
Color : black
Department : unisex-adult
ExternallyAssignedProductIdentifier : 6033051094852
ExternallyAssignedProductIdentifier1 : 747607906105
ExternallyAssignedProductIdentifier2 : 0747607906105
IncludedComponents : Nema 34 Closed Loop Stepper Motor Kit
ItemName : Yaregelun High Torque Nema 17 Bipolar Stepper Motor 92Oz.In/65Ncm 2.1 A Extruder Motor
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 11 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-motors
Manufacturer : Yaregelun
ModelName : 325784
ModelNumber : 325784
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 325784
ProductDescription : Yaregelun Electrical Specification:
Motor Type: Bipolar Stepper
Step Angle: 1.8 .
Holding Torque: 65Ncm(92oz.in)
Rated Current/phase: 2.1A
Phase Resistance: 1.6ohms
Inductance: 3mH+/-20%(1KHz)
Physical Specification:
Frame Size: 42 x 42mm
Body Length: 60mm
Shaft Diameter: 5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 500mm
Weight: 500g
Colour: Black
material: metal
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply the motor.
Package Contents:
1 * MOTOR
Only the above package content, other products are not included.
Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
ProductSiteLaunchDate : 2025-05-20T03:20:41.428Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500
Voltage : 2.1 volts