Cart 2 india

Specification
Brand : Generic
BulletPoint1 : EASY DISASSEMBLY: Let the 3D pinter PEH effect sheet cool to room temperature, then bend the sheet, and the print can be easily released, which can avoid damaging the film
BulletPoint2 : SWEETHEART PATTERN SIDE: PEH sweetheart print appearance, the bottom of the printed model has a sweetheart diagram, easy to stick the model, easy to sweep, can be well adhered to PLA, TETG and other materials, temperature 120℃
BulletPoint3 : WATER DROP PATTERN APPEARANCE: PEH water drop pattern appearance can adhere to various printing materials, such as PLA, ABS, TPU, TETG, nylon, temperature up to 120℃
BulletPoint4 : WITH TEXTURE: Double sided peh effect sheet appearance adhesion is strong, and printing does not warping, printed out the bottom of the product with texture effect, exquisite and beautiful
BulletPoint5 : LONG LASTING: PEH effect sheet build plate is easy to remove, gently bend the printing plate can easily take the Both sides can be printed, and the service life is twice as long as one side. Available on for Kobra 3 model
Color : Off-white
IncludedComponents : 1 x 3D Print Build Plate;1 x Magnetic Base
ItemName : 256 x268MM PEH Spring Steel Sheet duals Sided Build Plate Smooth Build Sheet Heated Bed, Sweetheart Water Drop Pattern Build Plate for Kobra 3 3D Printer Flexible Print Be
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 29 centimeters
ItemPackageDimensions_Width : 29 centimeters
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Generic
Material1 : spring steel
Material2 : Soft magnetic
ModelName : Generict7c05mg64d
ModelNumber : Generict7c05mg64d
NumberOfItems : 1
PartNumber : Generict7c05mg64d
ProductDescription : 1. EASY DISASSEMBLY: Let the 3D pinter PEH effect sheet cool to room temperature, then bend the sheet, and the print can be easily released, which can avoid damaging the film
2. SWEETHEART PATTERN SIDE: PEH sweetheart print appearance, the bottom of the printed model has a sweetheart diagram, easy to stick the model, easy to sweep, can be well adhered to PLA, TETG and other materials, temperature 120℃
3. WATER DROP PATTERN APPEARANCE: PEH water drop pattern appearance can adhere to various printing materials, such as PLA, ABS, TPU, TETG, nylon, temperature up to 120℃
4. WITH TEXTURE: Double sided peh effect sheet appearance adhesion is strong, and printing does not warping, printed out the bottom of the product with texture effect, exquisite and beautiful
5. LONG LASTING: PEH effect sheet build plate is easy to remove, gently bend the printing plate can easily take the Both sides can be printed, and the service life is twice as long as one side. Available on for Kobra 3 model

Specification:
Item Type: PEH Effect Sheet
Material: PEH
Size: Approx. 256 x 268mm / 10.08 x 10.55in

How to Use:
Direct installation and use

packing list:
1 x PEH Effect Sheet

Note:
1. Before each printing, make sure the appearance without any impurities, especially fingerprints and grease. If so, clean with isopropyl and wipe with a lintless paper towel.2. No magnetic base.
ProductSiteLaunchDate : 2024-12-25T03:00:55.790Z
Style : PEI texture + PEO smooth diamond 315*310mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31160000