Cart 2 india

Specification
Brand : Yoidesu
BulletPoint1 : DOUBLE SIDED PRINT: This is a Double Sided Textured PEI plate for QIDI X-Maximum 3 printers which present different textures, double sided printing. Size is 330x330mm
BulletPoint2 : APPLICABLE MODEL: Double sided textured PEI sheet fits perfectly with the for Flsu XY, for Troxy X3S, X5SA, X5SA Pro, for Geetch A30, A30 Pro, for Qidi X-Maximum 3, for Neptun 3, 4 Plus, Rais 3D Pro 2, Pro 2 Plus 3D printer
BulletPoint3 : EFFORTLESS MODEL REMOVAL: When the build plate cool down to the room temperature, no need other tools and the model effortlessly separates from the plate
BulletPoint4 : EASY TO CLEAN: For better adhesion, please spray with isopropyl alcohol and wipe the build plate with a no lint towel before use, any bit of grease or rest makes your prints non stick
BulletPoint5 : MAINTENANCE AND APPLICABLE FILAMENTS: Clean the apparent regularly with water and alcohol or IPA for optimal adhesion. Recommended the filaments is PLA, TPU, PETG, ABS, Nylon etc. and the high temperature of the heat bed is not exceeding to 260℃
ItemName : 3D Printer Double Sided Textured PEI Sheet, 330mmx330mm PEI Build Plate Print Bed for Flsu XY, for Troxy X3S X5SA, X5SA Pro, 3D Printer Accessories
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 36 centimeters
ItemPackageDimensions_Width : 36 centimeters
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Yoidesu
ModelName : Yoidesu2qag534nx6
ModelNumber : Yoidesu2qag534nx6
NumberOfItems : 1
PartNumber : Yoidesu2qag534nx6
ProductDescription : 1. DOUBLE SIDED PRINT: This is a Double Sided Textured PEI plate for QIDI X-Maximum 3 printers which present different textures, double sided printing. Size is 330x330mm
2. APPLICABLE MODEL: Double sided textured PEI sheet fits perfectly with the for Flsu XY, for Troxy X3S, X5SA, X5SA Pro, for Geetch A30, A30 Pro, for Qidi X-Maximum 3, for Neptun 3, 4 Plus, Rais 3D Pro 2, Pro 2 Plus 3D printer
3. EFFORTLESS MODEL REMOVAL: When the build plate cool down to the room temperature, no need other tools and the model effortlessly separates from the plate
4. EASY TO CLEAN: For better adhesion, please spray with isopropyl alcohol and wipe the build plate with a no lint towel before use, any bit of grease or rest makes your prints non stick
5. MAINTENANCE AND APPLICABLE FILAMENTS: Clean the apparent regularly with water and alcohol or IPA for optimal adhesion. Recommended the filaments is PLA, TPU, PETG, ABS, Nylon etc. and the high temperature of the heat bed is not exceeding to 260℃

Specification:
Item Type: Double Sided Textured PEI Sheet
Composition: PEI
Size: Approx. 330x330mm / 12.99x12.99in

How to Use:
Direct installation and use

PackageList:
1 x Printing Bed

Notice:
No magnetic base.
ProductSiteLaunchDate : 2024-12-16T11:06:36.088Z
UnspscCode : 44101700