Cart 2 india

Specification
Brand : evhooe
BulletPoint1 : How to operate: Once the temperature of the heating bed reaches room temperature, the print will peel off easily from the PEI plate. If printed matter becomes clogged, bending the plate slightly will make it easier to remove the printed matter.
BulletPoint2 : Double-sided: A heated bed temperature of approximately 60°C provides excellent adhesion and allows printing directly on both sides of a double-sided PEI without additional tools.
BulletPoint3 : Cold printing and frosting effect: Strong adhesion, no glue required, this PEI build plate can achieve cold printing, printing without warping the edges, and has a frosting effect on the bottom of the printed product, which is beautiful.
BulletPoint4 : Thickness: The PEI coating thickness of this is 0.25mm, the spring plate thickness is 0.4mm, and the magnetic rubber plate thickness is 1.2mm. The overall thickness is approximately 2mm.
BulletPoint5 : Strong compatibility: PEI build plate size is 255x255mm, suitable for Voron and other . The printing size of the 3D printer's spring steel is fully compatible with the machine.
ItemName : 3D Printer Spring Steel Build Plate Double Sided PEI Powder Spray Magnetic 255x255mm for Voron
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 28 centimeters
ItemPackageDimensions_Width : 28 centimeters
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : evhooe
ModelName : evhooeces21fvryk
ModelNumber : evhooeces21fvryk
NumberOfItems : 1
PartNumber : evhooeces21fvryk
ProductDescription : 1. Strong compatibility: PEI build plate size is 255x255mm, suitable for Voron and other . The printing size of the 3D printer's spring steel is fully compatible with the machine.
2. Cold printing and frosting effect: Strong adhesion, no glue required, this PEI build plate can achieve cold printing, printing without warping the edges, and there is a frosting effect on the bottom of the printed product, which is beautiful .
3. Double-sided: When the heating bed temperature is around 60°C, it provides excellent adhesion and can be printed directly on both sides of the double-sided PEI without any additional tools.
4. How to operate: When the heating bed temperature reaches room temperature, the print will easily peel off from the PEI plate. If printed matter becomes clogged, bending the plate slightly will make it easier to remove the printed matter.
5. Thickness: The PEI coating thickness of this is 0.25mm, the spring plate thickness is 0.4mm, and the magnetic rubber plate thickness is 1.2mm. The overall thickness is approximately 2mm.

Spec:
Item Type: Magnetic Spring Steel Plate Platform
Material: PEI spray powder, spring steel, soft magnet
Size: approx. 255 x 255mm/10 x 10 inch
Usage: Excellent 3D printer accessory tool
PEI spray thickness: approx. 0.25mm / 0.01inch
ProductSiteLaunchDate : 2024-10-23T21:13:20.844Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44101700